Miele DA 3466 Operating And Installation Instructions page 33

a Example: Installation without a front
panel installed and with the front
edge of the fume deflector flush with
the front edge of the cabinetry.
b Example: Installation with a front
panel to match the cabinetry This
installation requires dimension b for
the front panel plus ³/₁₆" (5 mm) for
the DML 400 fixing bracket to be
added to the shelf dimension.
To position the hood correctly, cut the
spacer strip to the required depth T and
then attach it to the back of the
appliance:
T= Depth of cabinetry K minus depth of
appliance G
 Cut the spacer strip supplied to
measurement T. Score along the
groove for the next smaller
measurement as shown, and remove
any extra.
Installation
33