Table of Contents
Advertisement
CRS1
Error Code
Diagnosis Contents Description of error
LOAD
Tray drive assembly
abnormal
PDRV
Cam gear/gear
assembly abnormal
UDU
UD base asssembly
abnormal
UDD
UD base asssembly
abnormal
UD1
UD base asssembly
abnormal
F1NG
Fail - safe mode. (For
open/close tray
unit(s))
F2NG
Fail - safe mode. (For
open/close tray
unit(s))
SRVC_TRV
To unlock the
traverse unit for
service
RSET
Cam gear jam/close
sensor faulty
CRS1 Error Code display
1. The errors that occured in CRS1 Mechanism can be recalled and displayed, in the order of the occurence under self-diagnostic
(Refer to Section 4.1 for procedures to enter this mode.
· Only the first 5 errors will be memorized (in backup memory). The subsequence error shall be ignored and not memorize.
For system with EEPROM as memory backup,memory space in EEPROM is neccesary.
2. To display all error code memorized
Tray unit does not move
from "STOCK" to "PLAY"
position
Cam
gear
does
not
move from "HOME" to
"PLAY" drive position.
UD Base assembly does
not move upwards from
tray 5 to tray 2
UD Base assembly does
not
move
downwards
from tray 1 to tray 5.
UD Base assembly does
not move to tray 1.
When
the
tray
open
operation is performed, it
fails to open.
It will
automatically close all
trays after the time-out
by the microprocessor.
During this time when it
fails, the error code will
appear.
When the tray
close
operation is performed, it
fails to close. It will
automatically open all
trays after the time-out
by the microprocessor.
During this time when it
fails, the error code will
appear.
1. All
trays
set
to
"STOCK" position
2. Mechanism
set to
tray 5
3. Cam gear set to
"HOME" position
During tray re-open, the
cam gear will rotate in
the opposite direction to
reset
the
cam
gearposition.
When
it
fails, the error code will
appear.
Automatic FL Display
36
Remarks
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
Advertisement
Table of Contents
