Samsung Galaxy S6 edge Instruction Manual page 436

4. Radio waves emitted by a Bluetooth device
may affect electronic medical equipment.
Turn off the terminal and other Bluetooth
devices in a train, aircraft or hospital,
near an automatic door or fire alarm, and
at a place where flammable gases are
generated such as a gas station.
■ Reception interference caused by wireless
LAN devices
The terminal's Bluetooth function and wireless
LAN devices use the same frequency band
(2.4 GHz). If you use the terminal near a
wireless LAN device, reception interference
may occur or the communications speed may
lower. Also, you may hear noise or have a
connection problem. In these cases, do the
following:
1. Keep the Bluetooth device over approximately
20 m away from a wireless LAN device.
2. Within approximately 20 m, turn off either
the Bluetooth device or the wireless LAN
device.
■ Bluetooth pass code
Pass code is an authentication code to
enter when accessing Bluetooth devices for
the first time to recognize and permit the
connection each other. Entering the same
pass code (up to 16 Half-width alphanumeric
characters) on each sending/receiving device
is required.
• On the terminal, pass code may be
displayed as "PIN", "passkey".
Data communication
434