4/20
This documentation
Bosch Rexroth Mellansel AB, Product specific Intallation and maintenance manual, Hägglunds motors RE 15440-X-B2/11.2016
1 This documentation
1.1 Display of information
Standardized safety instructions, symbols, terms and abbreviations are used so that
you can use this documentation to work quickly and safely with your product. To give
you a better understanding they are explained in the sections below.
1.1.1 Safety instructions
This documentation includes safety instructions in 2.6: Product-specific safety
instructions, 3: General instructions on material damage and product damage and
before a sequence of actions or an instruction for action involving a risk of personal
injury or damage to equipment.
The described danger prevention measures must be observed.
Safety instructions are formatted as follows:
Type of risk
Consequences of non-observance
▶
Safety precautions
▶
<List>
• warning sign:
• Signal word:
• Type of risk!:
• Consequences:
• Precaution:
Table 1: risk categories to anZi Z535.6-2006
warning signs, signal word
DanGEr
warninG
CaUTion
NOTice
SiGnal worD
Draws your attention to the hazard
Indicates the degree of hazard
Specifies the type and source of the hazard
Describes the consequences of non-compliance
Specifies how the hazard can be prevented
Meaning
Indicates a dangerous situation which will result in death or
serious physical injury unless averted.
Indicates a dangerous situation which could result in death
or serious physical injury unless averted.
Indicates a dangerous situation which could result in minor
to moderate physical injury unless it is averted.
Material damage: the product or its environment could be
damaged.