Cleaning The Brush Roll; Cleaning The Soft Roller; Checking For Blockages - Shark NV702UK Series Instructions Manual

MAINTENANCE
CLEANING THE BRUSH-ROLL

CLEANING THE SOFT ROLLER

1 To remove the Soft Roller, slide the Eject
Roller button on the floor nozzle�
2 Tap loose debris off the Soft Roller� Use a
dry towel to wipe it clean, and to remove
any debris caught in the teeth behind the
Soft Roller�
3 Hand-wash the Soft Roller as needed� Use
only water, and let it air-dry completely for
at least 24 hours�
4 Reinsert the Soft Roller and press it in until
it clicks securely into place�
NOTE: For best performance, keep the Soft Roller clean with regular maintenance�
14
s h a r kc l e a n . c o . u k
To remove the cover, use a coin to turn the
locks counterclockwise� Lift off the cover
and remove any debris or hair wrap� Check
the Debris Intake and clear away any dirt or
blockages�
To close the cover, push down until it clicks
into place, then turn the locks clockwise
until closed�
MAINTENANCE

CHECKING FOR BLOCKAGES

NOZZLE BLOCKAGES
Check the opening at the top of the nozzle
for any blockages�
DUST CUP BLOCKAGES
Detach dust cup from vacuum pod� Empty
dust cup, remove debris from lint screen, and
check for blockages�
HOSE BLOCKAGES
Detach hose from handle by pressing on the
release button at the top of the hose� Detach
the hose from the pod, and check openings
for blockages�
NOTE: Torch not included�
WAND BLOCKAGES
Detach wand from pod and handle, and
check both ends for blockages�
HANDLE BLOCKAGES
Detach handle from wand and check
openings for blockages�
s h a r kc l e a n . c o . u k
15