Shark Navigator DLX Owner's Manual
  1. Manuals
  2. Brands
  3. Shark Manuals
  4. Vacuum Cleaner
  5. Navigator DLX
  6. Owner's manual

Shark Navigator DLX Owner's Manual

Hide thumbs Also See for Navigator DLX:
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents

Navigator
®
DLX
Upright Vacuum
NV70 Series
OWNER'S GUIDE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Navigator DLX and is the answer not in the manual?

Questions and answers

Related Manuals for Shark Navigator DLX

Summary of Contents for Shark Navigator DLX

  • Page 1 Navigator ® Upright Vacuum NV70 Series OWNER’S GUIDE...

  • Page 2: Important Safety Instructions

    • Unplug from electrical outlet when • Your Shark® vacuum may not be not in use and before any maintenance If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, designed to stand up on its own.
  • Page 3 ASSEMBLY ASSEMBLY 1. Place Vacuum Pod onto Floor Nozzle Post until it clicks into place. With vacuum in 3. Insert the Extension Wand through the ring and into the top of the nozzle hose. the upright position, connect the Nozzle Hose from the pod to the Floor Nozzle. 4.
  • Page 4 WHOLE-HOME CLEANING WHOLE-HOME CLEANING SETTINGS CLEANING MODES Press the power/surface switch at the top of the pod. Select surface setting: O Power Off I Bare Floor For bare floors and small area rugs. II Carpet For carpets. POWER/SURFACE SWITCH UPRIGHT SUCTION CONTROL BRUSHROLL INDICATOR LIGHT To engage Brushroll, turn power on,...

  • Page 5: Emptying The Dust Cup

    EMPTYING THE DUST CUP CLEANING AND REPLACING THE FILTERS IMPORTANT: Unplug the power cord before performing any maintenance. CLEANING FILTERS Regularly rinse and replace the filters to maintain your vacuum’s suction power. To prevent damage from cleaning chemicals, rinse filters with cold water only. Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electric parts.

  • Page 6: Cleaning The Brushroll

    AVAILABLE ACCESSORIES CLEANING THE BRUSHROLL 1. Detach the vacuum pod from floor nozzle. 5.5" Crevice Tool 2. Remove any blockages or buildup from the airways in the Clean in corners and other tight spaces or nozzle. With scissors, carefully cut away any fibers, hair, or string reach baseboards and ceilings with this slim wrapped around the brushroll.

  • Page 7: One (1) Year Limited Warranty

    TROUBLESHOOTING Vacuum is not picking up dirt. No suction or light suction. • Check filters to see if they need cleaning. Follow instructions for rinsing and drying the filters before ONE (1) YEAR LIMITED WARRANTY reinstalling. See Cleaning the Filters for more information. •...
  • Page 8 s h a r kc l e a n . c o m s h a r kc l e a n . c o m...
  • Page 9 Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice. For SharkNinja U.S. Patent information, visit sharkninja.com/uspatents © 2020 SharkNinja Operating LLC. SHARK and SHARK NAVIGATOR are registered trademarks of SharkNinja Operating LLC. NV70Series�IB�E�REV�Mv9 PRINTED IN CHINA...

This manual is also suitable for:

Nv70 series

Table of Contents

Save PDF