Resetting The Tv To Factory Condition Using Service Mode - Sony KDL-32CX525 Service Manual

RESETTING THE TV TO FACTORY CONDITION
USING SERVICE MODE
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY Channel 5
3. If necessary, press JUMP or OPTIONS to go to DIGITAL
mode.
4. Press .
8
"SERVICE" changes to green RST.
5. Press MUTING .
RST executes the command and displays EXE.
6. Press 0 .
EXE-RST displays green, then red indicating the TV is
writing the data.
When the process is complete the green SERVICE text
displays and the LED display as shown below:
TIMER TIMER
7. Cycle AC Power by unplugging the AC Cord from the AC
Outlet, and then plug it back in.
The set restarts and displays the Initial Setup screen.
This may take several minutes.
KDL-32CX525/40CX525
SECTION 7 - SERVICE ADJUSTMENTS
Volume + POWER .
Standby Standby POWER POWER
53