Resetting The Tv To Factory Condition; Resetting The Tv To Factory Condition Using Service Mode - Sony KDL-32EX725 Service Manual

RESETTING THE TV TO FACTORY
CONDITION
Use the following instructions to restore the User Adjustments and
Channel Memory settings to the preset factory conditions.
1. While holding down the
press the POWER button on the TV Switch Unit of the
set.
2. The set restarts and displays the Initial Setup screen.
This may take several minutes.
KDL-32EX725/40EX725/55EX725
SECTION 7 - SERVICE ADJUSTMENTS
on the Remote Commander,

RESETTING THE TV TO FACTORY CONDITION

USING SERVICE MODE
1. TV must be in
standby
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY Channel 5
3. If necessary, press
mode.
4. Press .
8
"SERVICE" changes to green RST.
5. Press MUTING .
RST executes the command and displays EXE.
6. Press 0 .
EXE-RST displays green, then red indicating the TV is
writing the data.
When the process is complete the green SERVICE text
displays and the LED display as shown below:
TIMER TIMER
7. Cycle AC Power (Unplug and Plug AC Cord from the
AC Outlet).
The set restarts and displays the Initial Setup screen.
This may take several minutes.
Mode. (POWER off).
Volume + POWER .
JUMP or OPTIONS to go to DIGITAL
Standby Standby POWER POWER
71