Panasonic EH-HS60 Operating Instructions Manual page 7

C leanin g th e h a ir s tra ig h te n e r_____________________
• Clean the hair straightener after the press plate and iron plate
have cooled and with the plug removed from the power outlet.
• To clean the hair straightener, use a cloth that has been soaked
in soap and w ater and w ell w rung out. Do not use benzine,
thinner, or alcohol.
Doing so may crack or discolor the surface of the hair
straightener.
• If the felt under the cap of the tank is dirty, clean it with a soft
brush while running it under the tap water.
• To ensure tha t the hair straightener does not lose its ability to
release negative ions, clean the two negative ion nozzles (left
and right side) regularly (about once every 6 months) as
described below.
• C le a n in g m e th o d o f n e g a tiv e io n nozzles
Clean only after turning o ff the power and removing the power
cord from the power outlet.
Use a cotton swab (@) to lightly rub (about 5 tim es) the center of
the part (© ) that is inside of the negative ion nozzles (© ).
We recom m end the thin cotton swabs made for use with babies.
A lthough regular cotton swabs will work, they may be hard to
insert into the nozzles.
S p e c ific a tio n s
Model No.: EH-HS60
Power source
Rated current
Dim ensions 44 (W) x 70 (D) x 275 (H) mm
S team discharge
rate
Iron tem perature
Tank capacity
AC 220-240 V 50-60 Hz
0.2 A
Approx. 0.35 ml/min
Approx. 145 C
Approx. 6 ml
7