Cleaning Or Replacing The Ventilation Filter - Husqvarna Automower 420 Technical Manual
Hide thumbs
Also See for Automower 420:
- Operator's manual (100 pages) ,
- Workshop manual (60 pages) ,
- Installation manual (19 pages)
Table of Contents
Advertisement
5.17 Cleaning or replacing the
ventilation filter
1.
Dismantle the body. Refer to
5.2.1 Dismantling the body on page 59
2.
Dismantle the front display cover by pulling
up the cover firmly.
3.
Dismantle the front display cover bracket by
unscrewing the 3 screws with the display
cover closed.
4.
Remove the front bracket by lifting it straight
up, still with the display cover closed.
5.
Clean the filter carefully with a clean and
soft brush.
6.
If damaged, the filter must be changed. To
change filter:
a. Remove the damaged filter.
b. Clean thoroughly around the mounting
surfaces.
c. Apply the new filter, making sure the
adhesive surfaces fasten securely on the
chassis.
7.
Refit the bracket by pressing it straight
down so the spring springs back.
8.
Check the function of the display cover and
the stop button.
9.
Refit the display cover and body.
5. REPAIR INSTRUCTIONS
English - 71
Advertisement
Table of Contents
Troubleshooting
