Table of Contents
Advertisement
KDC-W4544U
KDC-W4644U
KDC-W4044U
KDC-W413U
CD-RECEIVER
INSTRUCTION MANUAL
Declaration of Conformity with regard to the EMC Directive
2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
English/00 (KEE)
Advertisement
Table of Contents
Related Manuals for Kenwood KDC-W4644UY
Summary of Contents for Kenwood KDC-W4644UY
- Page 1 KDC-W4644U KDC-W4044U KDC-W413U CD-RECEIVER INSTRUCTION MANUAL Declaration of Conformity with regard to the EMC Directive 2004/108/EC Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative’s: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands English/00 (KEE)
-
Page 2: Table Of Contents
Contents Before use Basic Operation General functions Tuner functions Disc & Audio file play functions Menu System Clock/ Display Settings Manual Clock Adjustment Text Display Selection Auxiliary Input Display Setting Audio Adjustments Audio Control Audio Setup Speaker Setting Music disc/Audio file Operation Music Search Music Search for iPod All Random... -
Page 3: Before Use
• If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • The characters which can be displayed by this unit are A-Z 0-9 @ “... -
Page 4: Basic Operation
Basic Operation [SRC] [FM+] [AM–] Release [DISP] Search [AUD] General functions Power/Source Select button: [SRC] Turns on the power. When the power is on, the source switches between Tuner (“TUNER”) , USB or iPod* (“USB” or “iPod”), CD (“CD”) , Auxiliary input (“AUX”), and Standby (“STANDBY”) each time this button is pressed. -
Page 5: Tuner Functions
wire to your telephone using a commercial telephone accessory. Refer to <Connecting Wires to Terminals> (page 21). Tuner functions FM band: [FM+] Switches between FM1, FM2, and FM3 each time the [FM+] button is pressed. AM band: [AM–] Switches to AM. Tuning: [4]/ [¢] Changes the frequency. -
Page 6: Menu System
Menu System Set up the following functions. Item Setting Entry Setting overview 1 sec. “CODE SET”/ “CODE CLR” “SKIP”* “0.5%”*/ “1%”/ “5%”/ “10%” “SYNC” “OFF”/ “ON”* “DIM” “OFF”*/ “ON” “ICON” “OFF”/ “ON1”/ “ON2”* “SWPRE” “R”*/ “SW” “SPRM” “OFF”/ “ON”* “NEWS” “OFF”*/ “00”... -
Page 7: Clock/ Display Settings
*Factory setting Function of KDC-W4544U/ W4644U Function of Russian sales model. Displayed item is depending on currently selected source or mode. The mark in Condition column shows the condition to which the item is displayed. : Can be set in other than standby state. : Can be set in standby state. -
Page 8: Auxiliary Input Display Setting
Clock/ Display Settings In Standby/ Auxiliary input source Information Source name Clock Select the text Press the [DISP] button. ⁄ • When you select the clock display, the display setting of each source will be changed to the clock display. •... -
Page 9: Audio Adjustments
Audio Adjustments Audio Control You can adjust following Audio Control items; Adjustment Item Display Subwoofer level “SW L” Bass Boost “B.BOOST”/ “B.B” System Q “NATURAL”/ “ROCK”/ “POPS”/ “EASY”/ “TOP40”/ “JAZZ”/ “GAME”/ “USER” Bass level* “BAS L” Middle level* “MID L” Treble level* “TRE L”... -
Page 10: Music Disc/Audio File Operation
Music disc/Audio file Operation Function of Audio file/ Internal CD source Music Search Selecting the music you want to listen to from the device or media being played now. Enter Music Search mode Press the Search button. “SEARCH” is displayed. Displays the current Audio file name. -
Page 11: All Random
in the list which is selected now. Set the ratio with “SKIP” in <Menu System> (page 6). Keep pressing this button for 3 seconds or longer skips songs at 10% irrespective of the setting. • The time of search by alphabet may become long depending on the number of songs in iPod or the folder structure. -
Page 12: Direct Disc Search
Music disc/Audio file Operation Accessory of KDC-W4644U Function of KDC-W4544U/ W4644U Function of disc changers with remote control Direct Disc Search Searchs the disc by entering the disc number. Enter the disc number Press the number buttons on the remote control. -
Page 13: Tuner Operation
Tuner Operation Auto memory entry Putting stations with good reception in the memory automatically. Enter Menu mode Press the Search button for at least 1 second. “MENU” is displayed. Select the Auto memory mode Press the [FM+] or [AM–] button. Select the “A-MEMORY”... -
Page 14: Other Functions
Other Functions Activating Security Code When Security Code is set, possibility of theft is reduced because input of Security Code is prompted to turn on the unit once it is turned off. ⁄ • You can set the Security Code with a 4 digit number of your choice. -
Page 15: Demonstration Mode Setting
Demonstration mode setting Setting the demonstration mode as follows; Display Setting “DEMO ON” The Demonstration mode function is ON. “DEMO OFF” Exit Demonstration mode (Normal mode). Enter Menu mode Press the Search button for at least 1 second. “MENU” is displayed. Select Demonstration mode Press the [FM+] or [AM–] button. -
Page 16: Basic Operations Of Remote Control
Accessory of KDC-W4644U Basic Operations of remote control FM/AM 0 — 9 General control Volume control: [VOL] Source select: [SRC] Volume reduce: [ATT] When the button is pressed again, the volume returns to the previous level. In Audio control Audio item select: [AUD] Adjust the Audio item: [VOL] ⁄... -
Page 17: Appendix
In this case, “RESUMING” is displayed without displaying a folder name, etc. Changing the browse item will display a correct title, etc. • You cannot operate iPod if “KENWOOD” or “✓” is displayed on iPod. • When the USB device is connected to this unit, it can be charged up provided that this unit is powered. - Page 18 Appendix For operating KCA-BT100 (Optional) To control KCA-BT100, operate as follows; To make setting for <Selecting the Dialing Mode>, select <Menu system> (page 6). Pressing the [AUD] knob for at least 1 second after selecting the "D.MODE" item allows you to enter the dialing method selection mode.
- Page 19 • RUS (Russian language setting) When this is set to ON, the following character strings are displayed in Russian: Folder name/ File name/ Song title/ Artist name/ Album name/ KCA-BT200/BT100 (optional accessory) • AUX When this is set to ON, AUX source can be selected. ON1: Outputs the sound of external unit connected to the AUX terminal when switched to AUX source.
-
Page 20: Accessories/ Installation Procedure
Accessories/ Installation Procedure Accessories Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the wire on the wiring harness. 4. -
Page 21: Connecting Wires To Terminals
Use the mini-plug cable which is stereo type and does not have any resistance. Front side Fuse (10A) To Kenwood disc changer/ External optional accessory (KDC-W4544U/ W4644U only) ⁄ To connect these leads, refer to the relevant instruction manuals. Wiring harness... - Page 22 Connecting Wires to Terminals Connector Function Guide Pin Numbers for Cable Colour ISO Connectors External Power Connector Yellow Blue/White Black Speaker Connector Purple Purple/Black Gray Gray/Black White White/Black Green Green/Black 2WARNING Connecting the ISO Connector The pin arrangement for the ISO connectors depends on the type of vehicle you drive.
-
Page 23: Installation/Removing The Unit
Installation/Removing the Unit Installation Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ⁄ • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). -
Page 24: Troubleshooting Guide
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. • Cannot set up the subwoofer. • Cannot set up the low pass filter. • No output from the subwoofer. • <Subwoofer output> of <Basic Operation> (page 4) is not set to On. - Page 25 The messages shown below display your systems condition. TOC ERR: • No disc has been loaded in the disc magazine. • The CD is quite dirty. The CD is upside- down. The CD is scratched a lot. E-05: The disc is unreadable. E-77: The unit is malfunctioning for some reason.
-
Page 26: Specifications
Specifications FM tuner section Frequency range (50 kHz space) : 87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) : 0.7 μV/75 Ω Quieting Sensitivity (S/N = 46dB) : 1.6 μV/75 Ω Frequency response (±3.0 dB) : 30 Hz – 15 kHz Signal to Noise ratio (MONO) : 65 dB Selectivity (DIN) (±400 kHz)