System Setup - Kenwood KVT-925DVD Instruction Manual

Setup Menu

System Setup

You can set up the system parameters.
Displaying the System 1
screen
System Set Up
System 1 screen
5
4
Off
1
3
2
7
On Off
1
60 English
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Sound Effects Menu. (see page 76)
4 Calls the Setup Menu.
5 Turns the key touch tone On or Off. (
6 Allows scrolling of text display on the Source
1
Control screen. ( Auto)
"Auto": Scrolls the screen automatically.
6
"Manual": Allows you to scroll the screen manually.
7 Selects a remote control signal. (
On)
If you turn it "Off", your operation from the remote
controller is rejected when you are in the TV mode.
8 Displays the System 2 screen.
1
8
If System Set Up is not shown, touch
or to display it.
Next
Displaying the System 2
screen
System 2 screen
On)
13
Prev.
9 Selects an illumination color of receiver keys.
( Red)
"Green" : Green
"Red" : Red
p Selects an illumination color of the Small Display.
( Blue)
"Blue": A blue color display
"Key Sync": The same color as the this unit button
9
illumination color
q Flashes the burglar alarm lamp if the protection
10
panel is removed. (
w Sets a music CD playback. (
11
11
"1" : Automatically recognizes and plays back an
MP3/WMA disc, a DVD or a music CD.
12
"2" : Forcibly plays back a disc as a music CD.
Select "2" if you wish to play a music CD having
a special format or if you cannot play a disc in
the "1" position.
• You cannot play an MP3/WMA/VCD disc in the "2"
position. Also, you may not play some music CDs
in the "2" position.
• Your setup is disabled when the disc is being
played.
e Displays the System 1 screen.
On)
1)
English 61