Related Manuals for Rockler SL Router Lift
Summary of Contents for Rockler SL Router Lift
- Page 1 SL Router Lift Instructions Effective October 2020 Review full instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent version of instructions for your product.
-
Page 2: General Safety Warnings
This product is designed only for specific applications as defined in the instructions and should not be modified or used for any manner not described in these instructions. Use only recommended accessories. Before using the SL Router Lift: READ, UNDERSTAND and FOLLOW ALL INSTRUCTIONS AND SAFETY WARNINGS. KEEP THESE INSTRUCTIONS READILY AVAILABLE FOR FUTURE REFERENCE. - Page 3 SL Router Lift router housing. dangerous kickback could occur. > To avoid serious injury, never attempt to cut a workpiece > The SL Router Lift is sized for routers with a without an Insert Ring installed. ⁄...
- Page 4 The Insert Ring MUST be perfectly flush with the SL Router Lift plate. If it is not, the workpiece could catch and dangerous kickback could occur. 2. Use your finger or a flat piece of wood to determine whether the Insert Ring is flush with the plate.
- Page 5 Adapter Collar is required (see page 4 for details). Insert the Adapter Collar into the housing so that its lipped edge will rest on the SL Router Lift housing when the lift is in the upright position. If the Adapter Collar, doesn’t fit at first, follow Step 4 to loosen the housing.
- Page 6 (20956, sold separately) to make this operation easier and more accurate. Threaded insert to accept 1/4"-20 plate mounting screws 7. Fit the SL Router Lift in the center opening of your router table. It is sized to fit the 8 ⁄ " x 11 ⁄...
- Page 7 Fig. 9 Fig. 10 Re-adjusting the Thread Tensioning The SL Router Lift features our patented thread-tensioning design, which holds the router in position when you set the cutting height. Thread tension is set at the factory, and depending on the amount of use, you may have to reset this adjustment periodically.
- Page 8 > To avoid serious injury, keep before use. Fig. 12. hands and fingers away from spinning router bit. Maintain Check Rockler.com for updates. If you have further questions, please awareness of the bit at contact our Technical Support Department at 1-800-260-9663 all times.
Need help?
Do you have a question about the SL Router Lift and is the answer not in the manual?
Questions and answers