How To Change The Door - Caple WC6411 Instruction Manual

In column wine cabinet

Table of Contents

H O W T O C H A N G E T H E D O O R O P E N I N G

› Incline the wine cooler with 45 degrees, take out right lower hinge's screws and supports

screws with screwdriver. (Fig.1)

› Level the wine cooler Hold the door and take out right upper hinge's screws with

screwdriver, then take out the door, put the door safety, unscrew 2 screws at bottom and

remove the magnet, then install at top of frame,and take out the location-plate's screws

and fix location-plate on the other side, and rotate door at 180 degree.

(Fig.2 & Fig.3 & Fig.4)

› Remove limited block B as per the arrows in picture, then release all the screws on limited

block A, and take away limited block A. Install the limited block A at the right side with

screws, then install limited block B,then fit the door with screws, then fix the support on the

lower right side. (see Fig.5& Fig.6& Fig.7)

support

180

Location

Plate

Limited block B

Instruction manual WC6411 & WC6401

Please keep this instruction manual for future reference

180

N OT E

Once door reversal complete please check and ensure door magnet is at the bottom of door.