Summary of Contents for Backyard Discovery MOUNT TRIUMPH 1701014
Page 1
MOUNT TRIUMPH WOODEN SWING SET MODEL: # 1701014 Backyard Discovery 3305 Airport Drive Pittsburg, KS 66762 1-800-856-4445 • Owner's Manual • Frequently Asked Questions • Assembly Instructions • Warranty Information Register your new swing set on-line @ www.backyarddiscovery.com (you will also find any updates on...
Page 2
STOP PARE Missing A Part? CALL US BEFORE GOING BACK TO THE STORE! The store where you made your purchase does not stock parts for this item. If you have assembly questions or if you need parts, whether they are missing or damaged Call Toll-Free Help Line or visit www.swingsetsonline.com ¡LLÁMENOS ANTES DE REGRESAR A LA TIENDA! La tienda donde realizó...
Page 3
Owner’s Manual Play House Dear Customer: Please read entire booklet completely before beginning the assembly process. Equipment is recommended for use by children 3 to 10 years of age. Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar Commercial Application.
Page 4
Owner’s Manual Play House Please refer to the Assembly section of the Assembly Manual for Maximum Fall Height. Positioning Your Play house 1. The Play house is designed to be installed on a level surface by an Adult with an Adult helper.
Page 5
Owner’s Manual Play House The following chart explains the fall height in feet from which a life threatening head injury would not be expected Critical Heights in feet (m) of Tested Materials Material Uncompressed Depth Compressed Depth 6" (152mm) 9" (228mm) 12"...
Page 6
Owner’s Manual Play House all moving parts including swing seats, ropes, cables, and chains for wear, Check • rust, or deterioration. Replace as needed. Check metal parts for rust. If found, sand and repaint using non Lead-based paint • meeting the requirements of Title 16 CRF Part 1303.
Page 7
Owner’s Manual Play House Owner’s Manual Play House Disposal Instructions: Disposal Instructions: When the Play house use is no longer desired, it should be disassembled and use is no longer desired, it should be disassembled and use is no longer desired, it should be disassembled and disposed of in such a way that no unreasonable hazards will exist at the time the unit disposed of in such a way that no unreasonable hazards will exist at the time the unit disposed of in such a way that no unreasonable hazards will exist at the time the unit...
Page 8
Owner’s Manual Play House APPENDIX A Information on Playground Surfacing Materials: The following information is from the United States Consumer Product Safety Commission’s Information Sheet for playground surfacing material; also see the following website for additional information:. www.cpsc.gov/cpscpub/pubs/323.html X3. CONSUMER INFORMATION SHEET FOR PLAYGROUND SURFACING MATERIALS X3.1 Select Protective Surfacing—One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment.
Page 9
Owner’s Manual Play House This information has been extracted from the CPSC publications “Playground Surfacing — Technical Information Guide” and “Handbook for Public Playground Safety.” Copies of these reports can be obtained by sending a postcard to: Office of Public Affairs, U.S. Consumer Product Safety Commission, Washington, D.C., 20207 or call the toll-free hotline: 1- 800-638-2772.
Page 10
Play House Assembly Manual FAQs: 1. Does the area for the play house need to be level? Yes. Backyard Discovery recommends the play house be positioned on a flat level area for maximum safety and durability. Any stakes provided should be used to secure it firmly to the ground.
Page 11
Tools Required for Installation: (These are the tools that are generally required for assembly of our outdoor products. These tools are not included with the outdoor product purchase.) (Level 24") (Square) (Open End Wrenches 1/2") (Phillips Screw Driver) (Tape Measure) (Claw Hammer) (Rubber Mallet - Optional) (Drill Attachments:...
Page 12
Basic Setup Dimensions Place the set on level ground, not less than 6 ft [2 m] from any structure or obstruction such as a fence, garage, house, overhanging branches, laundry lines, or electrical wires. 27'-7 5/8" General Information: Your set has been designed and engineered for children only and for residential use only.
Page 13
Parts Identification Wood Components (NOT TO SCALE) E1 - RIGHT REAR UPRIGHT - W2A02080 1 3/8"x3 3/8"x51 3/4" (36x86x1314) E2 - LEFT REAR UPRIGHT - W4L07493 1 3/8"x3 3/8"x51 3/4" (36x86x1314) E3 - LEFT FRONT UPRIGHT - W4L07494 1 3/8"x3 3/8"x51 3/4" (36x86x1314) E4 - RIGHT FRONT UPRIGHT - W4L07495 1 3/8"x3 3/8"x51 3/4"...
Page 14
Parts Identification Wood Components (NOT TO SCALE) E73 - RIGHT RAIL - W4L07623 1 3/8"x3 3/8"x54 7/8" (36x86x1395) E77 - ANGLE BRACE - W4L07631 1 3/8"x3 3/8"x74 3/8" (36x86x1890) F1 - RIGHT BALCONY UPRIGHT - W4L07506 1 3/8"x2 3/8"x31 3/4" (36x60x805) F2 - LEFT BALCONY UPRIGHT - W4L07507 1 3/8"x2 3/8"x31 3/4"...
Page 15
Parts Identification Wood Components (NOT TO SCALE) H77 - LEFT UPRIGHT - W4L07617 1"x3 3/8"x58" (24x86x1474) H78 - RIGHT UPRIGHT - W4L07618 1"x3 3/8"x58" (24x86x1474) H79 - END SUPPORT - W4L07632 1"x3 1/2"x42" (24x86x1072) H80 - GROUND BOARD - W4L07630 1"x3 3/8"x87 3/8"...
Page 28
Parts Identification Accessories (NOT TO SCALE) DP - SWING SEAT GREEN - A100027 SY - PLASTIC SUNBURST - A100322 DR - SLIDE RAIL 10' BOTTOM LEFT GREEN - A100030 DW - SLIDE SUPPORT TUBE 21.34x505 - A100034 DS - SLIDE RAIL 10' BOTTOM RIGHT GREEN - A100031 DT - SLIDE RAIL 10' TOP LEFT GREEN - A100032 TR - SLIDE RAIL 10' TOP RIGHT GREEN - A100033 DX - SLIDE BED 10' LIGHT GREEN - A100035...
Page 29
Parts Identification Accessories (NOT TO SCALE) SQ - "A" REVISION TAG - A100314 FA - QUICK LINK - A100069 EA - HAND GRIP YELLOW PLASTIC - A100043 GD - L BRACKET 66x66x127 - A100140 - 90° L-BRACKET - BLK - A4M00555 LP - STEERING WHEEL - A100105 TB - SWING BEAM EXTENSION BRACKET-LEFT - A100325 TC - SWING BEAM EXTENSION BRACKET-RIGHT - A100326...
Page 30
Parts Identification Accessories (NOT TO SCALE) - FAUCET KIT - A6P00024 - STOVE KIT - A6P00025 - GREEN HC ROCK #1 - A6P00036 - SURFACE MOUNT BASIN - A6P00032 - RED HC ROCK #1 - A6P00038 - TRAPEZE - A6P00034 - BLUE HC ROCK #2 - A6P00040 - YELLOW HC ROCK #1 - A6P00042 LN - Telescope - A6P00096...
Page 31
Parts Identification Accessories (NOT TO SCALE) APPLE ORANGE WATERMELON STRAWBERRY CARROT CORN PLASTIC KNIFE CUTTING BOARD FRUIT BASKET KIT - A6P00069...
Page 37
- BLUE HC ROCK #2 - A6P00040 - GREEN HC ROCK #1 - A6P00036 - YELLOW HC ROCK #1 - A6P00042 - RED HC ROCK #1 - A6P00038 ROCKWALL STEP 3 WASHER (24) LOCK INT BOLT PTH 8x15 (24) 1/4x3/4 (24) T-NUT 1/4 BOLT PTH 1/4x3/4...
Page 41
BZ - 9 1/2" SWING HANGER QUICK LINK - H100099 SWING BEAM ASSEMBLY STEP 4 NUT LOCK 5/16 (6 PLCS) NUT LOCK 5/16 WASHER FLAT 8x27 (6 PLCS) WASHER FLAT 8x27 WASHER SAFETY 17x30 WASHER SAFETY 17x30 (6 PLCS) 9 1/2" SWING HANGER QUICK LINK (6 PLCS) NOTE: AS YOU TIGHTEN MAKE SURE SAFETY WASHERS GET WEDGED BETWEEN THE BOARD AND SWING HANGER.
Page 42
M70 - SLIDE BED SUPPORT - W100935 DX - SLIDE BED 10' LIGHT GREEN - A100035 5/8"x3 3/8"x19 7/8" (16x86x505) 10 FOOT SLIDE ASSEMBLY STEP 1 BOLT WH 5/16x1/2 T-NUT 5/16 DX - SLIDE BED 10' LIGHT GREEN (SEE SLIDE ASSEMBLY INSTALLATION STEP FOR DECK MOUNTING HOLE BOLT WH 5/16x1/2...
Page 43
DS - SLIDE RAIL 10' BOTTOM RIGHT GREEN - A100031 TR - SLIDE RAIL 10' TOP RIGHT GREEN - A100033 DT - SLIDE RAIL 10' TOP LEFT GREEN - A100032 DR - SLIDE RAIL 10' BOTTOM LEFT GREEN - A100030 10 FOOT SLIDE ASSEMBLY STEP 2 BOLT WH...
Page 44
DW - SLIDE SUPPORT TUBE 21.34x505 - A100034 21.34 OD x 2.77 W x 505 10 FOOT SLIDE ASSEMBLY STEP 3 ● PLACE (1) SLIDE RAIL ASSEMBLY ON A FLAT SURFACE AND BEGIN INSERTING SLIDE BED AT THE BOTTOM OF THE SLIDE RAIL (FIG. 1). HAVE A HELPER BEND THE SLIDE BED TOWARDS THE TOP OF THE SLIDE AND INSERT THE BED INTO THE SLIDE CAVITY.
Page 45
10 FOOT SLIDE ASSEMBLY STEP 4 ● ONCE THE SLIDE BED, SUPPORT TUBES, AND SUPPORT BOARD ARE COMPLETELY IN THE CAVITY AND SUPPORT POCKET, SECURE USING 2-1/2" SCREWS AT EACH OF THE PILOT HOLE LOCATIONS AS SHOWN. ● REPEAT PROCESS FOR OPPOSITE SLIDE RAIL. SCREW PFH (38) SCREW PFH 8x3...
Page 46
E1 - RIGHT REAR UPRIGHT - W2A02080 G1 - SWING BEAM MOUNT - W4L07513 K1 - GROUND BOARD - W4L07489 1 3/8"x3 3/8"x51 3/4" (36x86x1314) 5/8"x5 1/4"x41 7/8" (16x134x1064) 1"x5 1/4"x62 1/8" (24x134x1577) E4 - RIGHT FRONT UPRIGHT - W4L07495 E9 - RIGHT FRONT UPRIGHT - W4L07512 K5 - RIGHT CENTER WALL RAIL - W4L07496 1 3/8"x3 3/8"x51 3/4"...
Page 47
E2 - LEFT REAR UPRIGHT - W4L07493 E8 - LEFT FRONT UPRIGHT - W4L07511 1 3/8"x3 3/8"x51 3/4" (36x86x1314) 1 3/8"x3 3/8"x43 1/2" (36x86x1104) E3 - LEFT FRONT UPRIGHT - W4L07494 K2 - GROUND BOARD - W4L07490 K13 - ARCHED WALL RAIL - W4L07580 1 3/8"x3 3/8"x51 3/4"...
Page 99
FA - QUICK LINK - A100069 DP - SWING SEAT GREEN - A100027 KN - CHAIN GREEN 31" - A100177 - TRAPEZE - A6P00034 EZ - CHAIN GREEN 51.25" - A100068 STEP 54 TIGHTEN QUICK LINK INSERT CHAIN INTO QUICK LINK CHAIN GREEN 31"...
Page 100
HC - BYD ID TAG (LARGE) WITHOUT AGES - A100242 STEP 55 SCREW PFH 8x1/2 BLK BYD ID TAG (LARGE) WITHOUT AGES SCREW PFH 8x1/2 BLK (4 PLCS)
Page 101
- GROUND STAKE REBAR - A4M00527 Anchoring Instructions STEP 56 TAP IN GROUND STAKES AT AN APPROXIMATE 45° ANGLE AT THE LOCATIONS SHOWN. BOLT WH 5/16x1/2 BLK USING GROUND STAKES AS A GUIDE, DRILL 7/16" DIA HOLES. NOTE: FAILURE TO USE GROUND STAKES CAN VOID WARRANTY & CAUSE INJURY! WASHER NUT BARREL WH 5/16x5/8 BLK LOCK EXT...
Page 102
Limited Warranty. In addition, Backyard Discovery will replace any parts within the first 30 days from date of purchase found to be missing from or damaged in the original packaging.
Need help?
Do you have a question about the MOUNT TRIUMPH 1701014 and is the answer not in the manual?
Questions and answers