Bluetooth Pre-Installation - Iveco DAILY 4x4 2020 Body Builder Instructions

DAILY 4x4 ‒ GUIDELINES FOR BODYBUILDERS
30 ELECTRONIC SUB-SYSTEMS
5.5 RECEIVER-TRANSMISSION SYSTEMS

5.5.2 Bluetooth pre-installation

The Bluetooth setup consists of:
●
specific control unit, positioned above the radio and hidden by a plastic cover;
●
buttons on the steering wheel;
●
ceiling fixture with microphone;
●
USB socket;
●
wiring.
1. Buttons on the steering wheel
For cowl version vehicles the ceiling fixture with microphone is provided in the box of accompanying material.
If required by installation in the cab, the microphone can be removed and recovered (see Figure 31); its position, however, must be
at a point as far away as possible from sources of noise and according to the reception area described in the (see Figure 32).
208938
2. USB port
Figure 30
– Printed 692.68.999 – 3 Ed. - Base 08-2020