Chapter 2/Disassembly procedures
Chapter 2/Disassembly procedures
Replacement of the knob
Pull knob to yourself to remove.Push the new knob
against the control panel.Rounded surfaces on the
inner surface of knobs shaft and outer surfaces of
commutators shaft must overlap.
BARBAROS BUILT IN OVEN
Removal/Replacement of the
control panel
1. Unscrew two screws mounted on both right and
left side of the panel.
2. Lift the control panel until pins become free form
the housing.Pull the control panel by taking care of
cables.Pull the cable sockets away form the panel.
Page 6