Reducing Or Enlarging A Copy; Automatic Ratio Selection - Sharp MX-M232D Operation Manual

Digital multifunctional system
Hide thumbs Also See for MX-M232D:
Table of Contents

Advertisement

REDUCING OR ENLARGING A COPY

There are three ways to enlarge and reduce copies:
• Automatic selection of a ratio according to the paper size: Auto ratio selection
• Specifying a ratio from 25% to 400%: Preset ratios/zoom
• Selecting the vertical and horizontal ratios separately: XY zoom
When the SPF/RSPF is being used, the zoom copy ratio range is 50% to 200%.
Note

AUTOMATIC RATIO SELECTION

1
Place the original in the document
feeder tray or on the document glass.
The original size will appear in the display. If the
correct size does not appear, see "SELECTING THE
ORIGINAL SIZE" (p.35).
Automatic ratio selection can be used when
Note
the original size is , A3, B4, A4, A4R, A5,
11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x
11", 8-1/2" x 11"R and 5-1/2" x 8-1/2". It
cannot be used for other sizes.
2
Press the [PAPER SELECT] key to
select the desired tray.
If the bypass tray is selected,
EXPOSURE
PAPER SELECT
COPY RATIO
AUT
automatic ratio selection cannot
COLOUR MODE
RESOLUTION
ADDRESS
FO
ADDRESS
PROGRAM
RESOLUTION
BRO
be used.
37
3
Press the [AUTO IMAGE] key.
CT
COPY RATIO
AUTO IMAGE
OUTPUT
2-S
N
ADDRESS
FORMAT
ORIGINAL SIZE
DU
ADDRESS
DU
N
BROADCAST
ORIGINAL SIZE
• The copy ratio will be automatically set.
• If the original and paper are in different orientations,
the image is automatically rotated to match the paper
orientation (rotation copy). However, if enlargement is
selected for copying onto a paper size larger than A4
(8-1/2" x 11"), the image will not be rotated.
• Rotation of the image can be disabled in the system
settings when reducing or enlarging a original.
(p.122)
• If the message "Image edge loss." is displayed, part
of the original image may be cut off.
4
Set the number of copies and press
the [START] key (
WXYZ
• To cancel automatic ratio selection, press the [AUTO
IMAGE] key again.
• When copying from the SPF/RSPF, automatic ratio
selection mode will automatically disable after the
[START] key is pressed and the original is scanned.
).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-m202dMx-m182dMx-m182

Table of Contents