Account Control; Reset Account - Sharp MX-M232D Operation Manual

ACCOUNT CONTROL

These programs are used to control use of the
machine by account. To access one of these
programs, select "ACCOUNT CONTROL" in the mode
selection screen, select the desired program in the
account control screen, and press the [OK] key.
AUDITING MODE
This program is used to enable auditing mode for
copy, print, and scan mode. To enable auditing mode
for fax mode, see the "Operation Guide (FACSIMILE
EXPANSION KIT)".
When auditing mode is enabled, a count is kept of the
number of pages output by each account (up to 50
accounts can be established), and the counts can be
displayed and totaled as necessary. To use the
machine, the 5-digit account number programmed for
the user's account must be entered.
To enable auditing mode for the printer and scanner
functions, the optional network expansion kit is
required. If the network expansion kit is not installed,
auditing mode cannot be used for printing and
scanning. Auditing mode for the printer function can
only be used for PCL and PS printers. Auditing mode
for the scanner function can only be used for network
scanning.
Auditing mode is initially disabled for all modes (factory
default setting).
Select "AUDITING MODE" and press the [OK] key.
The following screen will appear.
AUDITING MODE
COPIER
PRINTER
SCANNER
Select the desired mode with the [
To enable auditing mode for the selected
1
mode, press the [OK] key so that a
checkmark appears in the checkbox.
Auditing mode is enabled.
To disable auditing mode for the selected
mode, press the [OK] key to remove the
checkmark from the checkbox.
Auditing mode is disabled.
After enabling "AUDITING MODE", program
Note
account numbers as explained in "ACC. #
CONTROL" on (p.115).
TOTAL/ACCOUNT
This program is used to display the page counts of
each account in copy, print, and scan modes, and the
usage limits for copy and print modes. Misfed pages
are not included in the page counts.
For the network scanner function, the number of
transmitted pages is displayed.
Select "TOTAL/ACCOUNT" and press the [OK] key.
The following screen will appear.
TOTAL/ACCOUNT
ACCOUNT #
COPIES
COPY LIMIT
[ ]:
Switch to the page counts in other modes for the same
account, as well as the page limits, with the [
key.
To change to a different account number, press the
[ ] or [

RESET ACCOUNT

This program is used to reset the copy, print, and scan
page counts of an individual account, or all accounts,
to zero.
Select "RESET ACCOUNT" and press the [OK] key.
The following screen will appear.
RESET ACCOUNT
RESET 1 ACC.
RESET ALL ACC.
] or [ ] key.
Resetting the page counts of all accounts
1 Select "RESET AL
[ ] key and then press the [OK] key.
Select "YES" with the [ ] or [ ] key and
2
then press the [OK] key.
SYSTEM SETTINGS GUIDE
: 18114
000,222
02,000
NEXT
] key.
L ACC." with the [ ] or
] or [ ]
9
114