HCD-SBT100/SBT100B/SBT300W/SBT300WB
2-14. TUNER BOARD (HCD-SBT100/SBT300W)
flexible flat cable (9P) (FFC3)
ferrite core (FC5)
cushion
ferrite core (FC5)
2-15. MODULE (DAB TUNER) (DAB1), DAB BOARD (HCD-SBT100B/SBT300WB)
conductor side
9 Remove the two solders.
4 screw
(BVTP3
8)
qa module
(DAB tuner)
(DAB1)
qs two screws
(BVTP3
7 Remove the module
(DAB tuner) block
in the direction
of an arrow.
2 Remove the DAB board
block in the direction
of an arrow.
18
5 flexible flat cable (9P)
(CN101)
1 tape
(sub material)
2 Peeled from the
adhesive (BT).
tape
(sub material)
TUNER board
4 Remove the TUNER board block
in the direction of an arrow.
3 flexible flat cable (9P) (CN4004)
Note 1: When installing the flexible flat cable (9P),
do not mistake the insertion direction.
8 gasket
0 pin header 2P
(CN01)
6 connector
(CN4003)
B
B
qf DAB
8)
board
5 connector
(CN4001)
qd bracket DAB
8 TUNER board
6 shield (lower)
7 sheet (tuner)
qs screw
(BVTP3
8)
1 two screws
(BVTP3
8)
Note: When installing the flexible flat cable,
ensure the colored line.
No slanting after insertion.
OK
Inserting is straight to the interior.
flexible flat cable
colored line
connector
NG
Inserting is slant.
flexible flat cable
colored line
connector
3 two screws
(BVTP3
8)
Note 2: When installing the flexible flat cable,
ensure the colored line.
No slanting after insertion.
OK
Inserting is straight to the interior.
flexible flat cable
colored line
connector
NG
Inserting is slant.
flexible flat cable
colored line
connector