Samsung YXM1Z User Manual page 18

Using Your Helix Alone
Recording a Channel
1. While you're listening to live XM, select XM ¨ Record ¨ Rec Channel. You will record
the channel you're currently listening to.
2. To stop recording at any time, select XM ¨ Record ¨ Stop Recording. If you change
channels, Helix automatically stops recording.
3. You can choose to stop recording at the end of the song you're currently listening to by
selecting XM ¨ Record ¨ Record Song.
34
Using Your Helix Alone
Using Your Helix Alone
Scheduling a Recording Session
You can set Helix to record XM at a later time. When you schedule a recording session,
remember that Helix must be able to receive a live XM signal when the session begins.
1. To schedule a recording session, select XM ¨ Record ¨ Schedule Rec ¨ New
Session. Make sure the time shown on your Helix is correct; otherwise the recording ses-
sion may not start. If the time is not correct, set the time zone for your location (page 75)
and wait until the XM signal updates Helix's clock.
2. The "Scheduled Rec" display allows you to set various options. Use the up and down arrow
buttons to adjust each entry. Press the left or right arrow buttons to move to the previous
or next option.
Helix informs you if there is a scheduling conflict such as overlapping sessions.
You can choose to schedule a session for
"Today," "Everyday," or a specific "Date."
Set start and stop times using the up and
down arrow buttons. If the session length
exceeds the available memory, you will
record over the oldest XM tracks in the
memory, so you'll always have the latest
content.
Choose the channel you want recorded.
You can enter the channel number using
the remote's numeric keys.
Choose "OK" to save the session or
"CANCEL" to start over.
35
Using Your Helix Alone