Samsung DVD-L100 Manual page 64

Troubleshooting
Symptom
Video does not appear on
DVD
with a external component
connected to the DVD
player
Dolby Digital audio volume
is too low
Battery pack Battery pack won't charge
operation
Power does not turn on
Power charge lamp does
not light (Battery pack won't
charge)
Battery pack
Power charge lamp quickly
operation
flashes Green
Check
• Check that the TV is set to VIDEO or AV.
• Check that the video or audio cable is securely connected.
• Change the "Dynamic Comp." setting to "On". This will turn up the
comparatively low volume level of Dolby Digital, which provides the most
wide, dynamic sound range.
• Check that the DVD player is turned off.
You cannot charge the battery pack with the player turned on.
• A hot battery pack may take longer to charge.
Wait until the battery pack is sufficiently cooled down.
• Replace with a fully charged battery pack or use the AC adapter.
• Replace with a fully charged battery pack or use the AC adapter.
If the DVD player is overheated and the battery pack's internal
temperature goes up to a certain level, you will not be able to
charge the battery pack.
In this occurs, remove the battery pack. After the battery pack has sufficiently
cooled down, charging will begin automatically.
• Check that the temperature is within the range of 50
• Check that the DC cord of the AC adapter is Plugged in correctly.
• Remove the DC cord from the battery pack and then re-plug.
If the battery pack is installed, remove the DC cord from the battery
pack before performing above procedure.
• Recharge a different power pack. If the same symptom occurs, your
AC adapter may be defective. If the second battery pack charges without any
problem, your first battery pack may be defective or needs battery replacement.
ENGLISH
o o
F~86 F.
63