Table of Contents
Advertisement
4.3.3. Sensor device Setup
1) Insert battery to the battery module of Sensor device
First, release the screw on the battery module using screw driver.
Second, open the upper case of battery module and insert the battery.
Lastly, close the case and lock the screw.
;
Do not replace the battery at extreme environment condition (Extremely high
temperature, high pressure, high humidity and Etc...).
Please contact to the manufacturer, if you need more information
to replace the battery.
The battery certified to IEC 60086-4 or UL1642 should be used.
2) Connect Electrodes to electrode connect hole in each side of the Sensor device
Samsung Confidential
[14]
Advertisement
Table of Contents
