XP-2101
Start Here
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online
User's Guide.
Note:
This printer is designed for use with Epson
third-party cartridges or ink. For important ink information, visit
www.latin.epson.com/tintaepson or see your printer box.
1
Unpack
Note:
Do not open ink cartridge packages until you are ready to install
the ink. Cartridges are vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
2
Lift up the scanner unit until it locks into place and
remove all protective materials from inside the product.
Caution:
Do not touch the flat white cable.
3
Lower the scanner unit.
cartridges only, not
®
2
Turn on and configure
1
Connect the power cord to the back of the product and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Turn on the product and wait for the
Note:
If all of the printer lights are flashing, an error has occurred.
Turn off the printer, lift the scanner unit and remove any protective
material that has been left inside. Then turn the printer back on.
3
Install ink cartridges
Caution:
Keep ink cartridges out of the reach of children and do not
drink the ink.
Note:
The included initial cartridges are designed for reliable printer
setup and cannot be used as replacement cartridges or resold. After
setup, the remaining ink is available for printing.
1
Lift up the scanner unit until it locks into place.
2
Gently shake the black ink cartridge.
Note:
Do not shake the other ink cartridges.
ink light to turn on.
Need help?
Do you have a question about the XP-2101 and is the answer not in the manual?
Questions and answers