Page 1
DLPTV I N S T R U C T I O N M A N U A L HL-P4667W/HL-P5067W/HL-P5667W/HL-P6167W...
Page 3
A Guide to Digital TV • What is Digital Television? Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set. Using DTV, broadcasters can transmit high definition TV (HDTV) images, Dolby digital surround audio, and new services such as multicasting (transmitting more than one program on the same TV channel) and datacasting.
Page 4
The provided CableCARD from your local cable service provider needs to be inserted into the CableCARD slot of a Digital Cable Ready TV. Please refer to page 24 for how to insert the CableCARD. A digital set-top box which used to be provided by the cable service provider is no longer needed with Digital Cable Ready TVs and CableCARDs.
Page 5
This is a big advantage for DTV over analog TV - there is no noise, ghosting, static, or scratchy audio. 3. How can I connect an antenna in my townhouse, co-operative apartment,...
Separate VHF and UHF Antennas ...21 Connecting Cable TV and VCR...22 Cable without a Cable Box ...22 Cable with a Cable Box that Descrambles All Channels ...22 Connecting a Analog Cable Converter Box ...23 Connecting a Analog Cable Converter Box and a VCR...23 Connecting CableCARD ...24...
Page 7
Changing the Picture Size ...55 Digital Noise Reduction ...56 DNIe (Digital Natural Image engine) Setting the My Color Control Mode...58 Using the Color Weakness Enhancement Feature ...60 Setting the Film Mode...61 Viewing Picture-In-Picture...62 Selecting the Sound Source ...68 Freezing the Picture ...69 Setting the Blue Screen Mode...70...
• Why do I need to replace the lamp? The lamp used in a DLP TV has a limited lifespan. For the best screen quality it needs to be replaced periodically. After replacing the lamp, the screen quality will be bright and clear as new.
Page 11
• Be sure the replacement Lamp is the same type. • After replacing the lamp, align the lamp cover with the groove and secure the screws. • The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective circuit).
• AV network system (Anynet) that enables you to easily control Samsung audio-video(AV) devices from this TV. • CableCARD slot Accessories Once you have unpacked your TV, check to make sure that you have all the parts shown here. If any piece is missing or broken, call your dealer. Remote Control Warranty Cards (2)/...
Lamp may be defective. Please contact a certified technician. • It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately. • The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working.
Press to activate (or change) a particular item. Side Panel Jacks Use the rear of right side panel jacks to connect a component that is used only occasionally (a camcorder or video game, for example). Connect the video signal from a camcorder or video game.
Use the rear panel jacks to connect components such as a VCR. You can connect different components such as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and two sets of component video input jacks on the rear panel of your TV. For more information, please see “Connections”.
Remote Control You can use the remote control up to about 23 feet from the TV. When using the remote control, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player or Samsung Set-Top Box.
Page 17
Make sure you replace both batteries and do not mix old and new batteries in the remote control. If you won’t be using the remote control for a long time, remove the batteries and store them in a cool dry place.
Connections Connecting VHF and UHF Antennas If you do not have a cable system, you will need to connect an antenna to your TV. Antennas with 300-ohm Flat Twin Leads If your antenna looks like this: Place the wires from the twin...
Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).
Connections Connecting Cable TV and VCR You can connect different cable systems to your TV, including cable without a cable box, and cable with a cable box that descrambles some or all channels. Cable without a Cable Box If you want to connect cable, and you do not need to use a cable box: Plug the incoming cable into the “Cable IN”...
“Cable IN” so that you can use the TV features. When viewing premium channels, select “Air IN” and tune the TV to channel 3 or 4 (whichever channel is vacant in your area), then use the converter box to change channels. You will need two coaxial cables.
Connections Connecting CableCARD You must obtain a CableCARD from a local cable service provider. Insert the CableCARD into the “CableCARD” slot and the message “CableCARD Inserted” is displayed on the screen. If the channel information does not already exist, the message “Updating Channel List”...
Connecting a Camcorder The side panel jacks on your TV make it easy to connect a Camcorder to your TV. You can use your camcorder to view tapes without using a VCR. Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the camcorder.
Connections Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a DVD player to your TV. Connecting to Y,P Connect a set of audio cables between the COMPONENT (1 or 2) AUDIO (L,R) IN jacks on the TV and the AUDIO OUT jacks on the DVD player.
Connecting a DTV Set-Top Box Connecting to Y,P Connect a set of audio cables between the COMPONENT (1 or 2) AUDIO (L,R) IN jacks on the TV and the AUDIO OUT jacks on the Set-Top Box. Connect a set of video cables between the...
TV and the HDMI OUT jack on the Set-Top Box. NOTE • Make sure the HDMI/DVI source's power is on, or you will be unable to select it in the menu's source list. English - 28 TV Rear Panel DTV Set-Top Box...
Connecting a Digital Audio System There are many types of digital audio systems on the market today. A simplified illustration of an audio system is shown below. For more information, see your audio system owner’s manual. If your audio system has a optical digital audio input, connect to the “DIGITAL...
You can also use the POWER button on the front panel. Viewing the Menus and On-Screen Displays The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu system by pressing the MENU button on the remote control. Once the on-screen menu appears, use the …/†/œ/√/ENTER buttons on your remote control to select menu items and make adjustments.
Selecting a Menu Language Press the MENU button. Input Press the … or † button to Picture select “Setup”, then press the Sound ENTER button. Channel Setup Guide Press the ENTER button to Input select “Language”. Picture Press the … or † button to Sound select “English”, “Español”...
Operation Memorizing the Channels Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH to scan through the channels. This eliminates the need to change channels by entering the channel digits.
Page 35
• STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to “Storing Channels in Memory”.
Operation Adding and Erasing Channels You can add channels that were not memorized (or delete unwanted channels from memory). English - 36 Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button.
Use the number buttons to quickly switch to any channel. Press the number buttons to go directly to a channel. For example, to select channel 27, press “2,” then “7.” The TV will change channels when you press the second number.
Operation Customizing Your Remote Control Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal remote control can also operate a VCR, Cable box, DVD, and Samsung Set-Top Box (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung).
Operation Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) English - 40 Option 1: Setting the Clock Manually Press the MENU button.
Page 41
Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “Time”, then press the ENTER button.
Operation Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes). English - 42 Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button.
Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top box or the TV source (broadcast or cable). Setting the Signal Source Alternate method Press the SOURCE button on the remote control repeatedly to select an external signal source.
Operation Assigning Names to External Input Mode This feature enables you to name the input source you have connected. English - 44 Press the MENU button. Press the ENTER button to select “Input”. Press the … or † button to to select “Edit Name”, then...
Channel Control Selecting Your Favorite Channels You can store your favorite channels for each available input source (such as TV and CATV). This allows you to quickly and easily find frequently watched channels by pressing the FAV.CH button on the remote control.
Use this feature to assign an easy-to-remember label to analog channel (i.e., “CBS”, “ESPN”, “PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a blank. When the INFO button is pressed, the channel label will appear next to the channel number.
Channel Control Fine Tuning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. NOTE • Only analog TV channels can be fine tuned. English - 48 Analog Press the MENU button. Press the … or † button to select “Channel”, then press...
Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel.
Channel Control LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). English - 50 Press the MENU button. Press the … or † button to select “Channel”, then press...
Picture Control Picture Control You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color” and “Tint” according to personal preference. (Alternatively, you can use one of the automatic settings. See next page.) NOTE • “Tint” doesn’t operate...
Page 53
ENTER button. Press the EXIT button to exit. • Choose “Dynamic” for viewing the TV during the day or when there is a bright light in the room. • Choose “Standard” for the standard factory settings.
Press the … or † button to select “Cool2”, “Cool1”, “Normal”, “Warm1”, or “Warm2”, then press the ENTER button. Press the EXIT button to exit. NOTE • Color tone is not available in the “Cinema” picture mode. Picture √ Input Mode : Standard √...
• You can select only 16:9, 4:3 screen size in the Component(480p, 720p, 1080i) Mode. • With PIP On, the screen automatically becomes wide in the Antenna, AV (1~3), S-Video (1~3) or Component (480i) mode. With PIP Off, it returns to original screen size.
Picture Control Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. English - 56 Press the MENU button.
DNIe (Digital Natural Image engine) This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. Alternate method Press the DNIe button on the remote control repeatedly to select one of the settings.
Operation Setting the My Color Control Mode My Color Control allows users to adjust colors according to their preferences, by adjusting skin, sky, and grass tones using the predefined settings (“Blue”, “Green”, “Pink”, “Standard”, and “Custom”) without affecting other colors on the screen.
Page 59
Changing the adjustment value will refresh the adjusted screen. Resetting the My Color Control Colors to the Factory Defaults You can return to the factory default settings for My Color Control colors. Press the MENU button to display the “Detail Control”...
Picture Control Using the Color Weakness Enhancement Feature This feature adjusts the Red, Blue or Green color to enhance the picture according to the user's particular color weakness. English - 60 Press the MENU button. Press the … or † button to select “Setup”, then press...
Setting the Film Mode You can automatically sense and process film signals from all sources and adjust the picture for optimum quality. NOTE • Film mode is supported in 480i only. Press the MENU button. Input Press the … or † button to Picture select “Picture”, then press...
NOTES • This feature doesn’t function when the “V-Chip” is active. • If you turn the TV off while watching and turn it on again, then the mode will return to normal video. • Digital broadcasting is not available in PIP.
Page 63
You can use PIP to view a signal from an external source, such as a VCR. NOTE • For more information about external signals, see “Viewing an External Signal Source” (See page 43). If you select “TV”, the sub picture will be the same as the main picture. Press the MENU button. Input Press the …...
Page 64
“Swap”, then press the ENTER button. The sub picture appears in the main picture, and vice versa. Press the EXIT button to exit. NOTE • SWAP is not available when Main picture is Digital broadcasting. Picture Input √ Mode : Standard √...
Page 65
Changing the Size of the Sub Picture Press the MENU button. Input Press the … or † button to Picture select “Picture”, then press Sound the ENTER button. Channel Setup Guide Press the … or † button to Input select “PIP”, then press the Picture ENTER button.
Page 66
Picture Control Changing the Location of the Sub Picture English - 66 Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Press the … or † button to select “PIP”, then press the ENTER button.
Page 67
Changing the Channel of the Sub Picture After you set the signal source (antenna or cable) of the sub picture, it is easy to change channels. Alternate method Press the CH control to change the sub picture channels while PIP is on.
Picture Control Selecting the Sound Source You can use this feature to hear sound from the main or sub (PIP) picture. English - 68 Press the MENU button. Press the … or † button to select “Sound”, then press the ENTER button.
Freezing the Picture Press the STILL button to freeze a moving picture. (Normal sound will still be heard.) Press again to cancel. NOTE • In the PIP mode, the main and sub pictures are stilled at the same time. English - 69...
Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen”...
Sound Control Sound Control You can control and customize the sound levels and settings of the TV with the remote control. English - 72 Adjusting the Volume Press the VOL+ or VOL– buttons to increase or decrease the volume. Using the MUTE Button At any time, you can temporarily cut off the sound.
Page 73
Press the EXIT button to exit. Using Automatic Sound Settings Your TV has automatic sound settings (“Standard”, “Music”, “Movie”, and “Speech”) that are preset at the factory. You can select “Custom”, which automatically recalls your personalized sound settings.
Sound Control Setting the SRS TSXT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. Trusurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.
“Auto Volume” automatically adjusts the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Sound Control Choosing a Multi-Channel Sound (MTS) track The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). The availability of these additional “multitracks” depends upon the program.
Choosing a Multi-Channel Sound (MTS) track Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP. Alternate method Press the MTS button on the remote control repeatedly to select an external signal source. NOTES • Choose “Mono” for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal.
Sound Control Choosing a Digital Sound Format Digital sound can be output from the rear-panel connector on your TV. The digital sound output is optical connector labeled “Optical Out”. After connecting an optical digital-audio component, you must specify the transmission format (Dolby or PCM, as appropriate to your digital audio component).
Selecting the Internal Mute When using a device such as a Home Theater or Amplifier with external speakers, you can set Internal Mute to On to cut off sound from the TV's internal speakers NOTES • The VOL +, VOL - and Mute buttons do not operate when the Internal Mute is set to On.
Sound Control Setting the On/Off Melody A melody sound can be set to come on when the TV is powered On or Off. English - 80 Press the MENU button. Press the … or † button to select “Sound”, then press the ENTER button.
Setting the Function Help Displays Help on the menu functions. English - 82 Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “Function Help”, then press the ENTER button.
Menu Transparency Level Adjusts the transparency of the menu screen. Press the MENU button. Press the … or † button to Input select “Setup”, then press Picture the ENTER button. Sound Channel Setup Guide Press the … or † button to select “Menu Transparency”,...
Special Features Using the V-Chip Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that is defined by the user). The on-screen menu will instruct you to assign a password (you can change it later, if necessary).
Page 85
How to Enable/Disable the Rating Controls Press the MENU button. Input Press the … or † button to Picture select “Setup”, then press Sound the ENTER button. Press the … or † button to Channel select “V-Chip”, then press Setup the ENTER button.
Page 86
Special Features How to Set up Restrictions Using the “TV Parental Guidelines” The parental restrictions can be set up using either of two methods: The “TV Parental Guidelines” or “MPAA Rating”. English - 86 Press the MENU button. Press the … or † button to select “Setup”, then press...
Page 87
• The restrictions for these two groups work independently: If a household includes very young children as well as young adults, the TV parental guidelines must be set up separately for each age group. (See page 89.) TV Parental Guidelines...
Page 88
The Movie rating system uses the “MPAA” (Motion Picture Association of America) system, and its main application is for movies. When the rating control is on, the TV will automatically block any programs that are coded with objectionable ratings (either “MPAA Rating” or “TV Parental Guidelines”).
Page 89
Fantasy or cartoon violence. • TV (FCC) ratings : The particular rating that you have selected will be locked (and indicated as a red “L” on a blue background). Also, all of the age-based ratings will be locked within the particular group (i.e., “group 1”...
Special Features Viewing Closed Captions (On-Screen Text Messages) The Analog Caption function operates in either analog RF channel mode or external signal mode. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) English - 90 Analog Press the MENU button.
Page 91
Press the EXIT button to exit. NOTES • The default is “CC1”. CC1 : The Primary Synchronous Caption Service. These are captions in the primary language that must be in sync with the sound, preferably matched to a specific frame.
Special Features Viewing Closed Captions (On-Screen Text Messages) The Digital Captions function operates on digital channels. NOTE • “Caption Option” are available only when “Service1~ Service6” can be selected in “Mode”. English - 92 Press the MENU button. Press the … or † button to select “Setup”, then press...
Page 93
The default is “Standard”. Font Style This option consists of “Default”, “Style0 ~ Style 7”. You can change the font you want. The default is “Style 0”. Foreground Color This option consists of “Default”, “White”, “Black”, “Red”, “Green”, “Blue”, “Yellow”, “Magenta”, and “Cyan”.
This menu works with a CableCARD provided by a local cable service provider. Prior to accessing this menu, a CableCARD should be connected to the rear panel of the TV. For detailed connection instructions refer to the “Connecting CableCARD” section on page 24 of this manual.
Using the CableCARD Reset Function Sets up relevant CableCARD options. CableCARD Reset Resets CableCARD when the channels provided by CableCARD are not available. Press the MENU button. Press the … or † button to Input select “Setup”, then press Picture the ENTER button.
Page 96
Special Features Channel List Reset Deletes and reorganizes the channel list provided by CableCARD. English - 96 Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “CableCARD...
Using the Guide How to Enable/Disable the Rating Controls You can display a list of all channels or your favorite channels. Alternate method Press the CH.LIST button on the remote control to display a list of channels. Press the MENU button.
Page 98
Repeatedly pressing ENTER button will alternate between “Add” and “Delete”. • Yellow button : Press to add all channels Blue button : Press to delete all channels Press the MENU button to exit. Guide Input √...
Appendix Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest service center. Problem Poor picture quality. Poor sound quality. No picture or sound.
TV set. Temperature • If your TV is suddenly moved from a cold to a warm place, unplug the power cord, and allow at least two hours for moisture that may have formed inside the unit to dry completely.
Page 102
DLPTV 1-800-SAMSUNG (1-800-726-7864) Samsung Electronics America Service Division 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 www.samsungusa.com Samsung Electronics Canada Inc. Samsung Customer Care 7037 Financial Drive Mississauga, Ontario L5N 6R3 www.samsung.ca BP68-00413A-X9...