Panasonic AFPX-COM5 Upgrade Procedure page 3

STEP4
STEP5
STEP6
The pop-up appears.
Select the firmware "fpxct.bin" for the upgrade, and
press the open button.
[The upgrade starts.]
Please wait without doing any other operations.
(approx. 2 - 3 minutes)
Although the screen of ConfiguratorWD may be
ERR LED
disturbed (freezing) during this process, please wait.
2 - 3 minutes later, the ERR LED lights up for a
moment, and then turns off.
Press the search button to check the version.
[The version has been upgraded]
[The version has not been upgraded]
[Units cannot be found by searching with the
ConfiguratorWD.】
３
The upgrade has been succeeded.
■The operation has completed.■
The upgrade was failed. Check the operating
environment, and upgrade the unit again.
The internal program may be damaged.
Please contact our Sales Representative.