Fixing Unit - Canon i-SENSYS MF729Cx Important Safety Instructions And Installation Manual

Fixing Unit

Dirt may adhere to the fixing units inside the machine and cause black streaks to appear on printouts. To clean the fixing unit, perform
the following procedure. Note that you cannot clean the fixing unit when the machine has documents waiting to be printed. To clean the
fixing unit, you need plain A4 or Letter size paper. Set the paper in the paper drawer or manual feed slot (
Paper Drawer Loading Paper in the Manual Feed Slot) before performing the following procedure.
Cleaning consumes the toner cartridge. Make sure that there is sufficient toner cartridge remaining beforehand.
the Amount Remaining in the Toner Cartridges
1
Press and tap <Menu>.
2
Tap <Adjustment/Maintenance>.
3
Tap <Clean Fixing Assembly>.
4
Read the message that is displayed, and tap <OK>.
5
Tap <Start>.
Cleaning starts. When the <Finished.> message is displayed approximately 1 minute later, press
Screen.
0SCJ-0CF
Loading Paper in the
Checking
to return to the <Home>