Starting Pc Mode - Samsung DIGIMAX A503 User Manual

Starting PC mode

• If you connect the USB cable to a USB port on your PC and then turn on the
power, the camera will automatically switch to "computer connection mode".
• In this mode, you can download stored images to your PC through the USB cable.
• The LCD monitor is always turned off in this mode.
■ Connecting the camera to a PC
1. In any mode with the exception of Voice
Recording mode, press the Menu button.
2. Press the LEFT/ RIGHT button and select the
[SETUP] menu tab.
3. Select the [USB] menu by pressing the UP/
DOWN button and press the RIGHT button.
4. Use the UP and DOWN buttons to select
[COMPUTER], and then press the OK button.
5. Press the menu button twice and the menu will disappear.
6. Connect the PC to the camera with the USB cable.
※If you selected [PRINTER] in Step 4,
when you connect the camera to
your printer, the [CONNECTING
PRINTER] message will display and
the connection will not be
established. In this case, disconnect
the USB cable, and then follow the
procedure from Step 2 and onward.
INFORMATION
● The camera driver must be installed before using PC mode.
《62》
■ Downloading stored images
You can download the still images stored on the camera to your PC's hard disk
and print them or use a photo editing software to edit them.
1. Connect the camera to your PC with the USB cable.
2. On your computer's desktop display, select
SETUP
DATE
TIME
IMPRINT COMPUTER
USB PRINTER
BACK: SET:OK
3. Select an image and press the right
4. A pop-up menu will open.
5. Click a folder where you want to paste the file.
[My computer] and double click [Removable
Disk → DCIM → 100SSCAM].
The image files will then be displayed.
mouse button.
Click the [Cut] or [Copy] menu.
- [Cut] : cuts a selected file.
- [Copy]: copies files.