Table of Contents
Advertisement
360
4-5. Using the driving support systems
2
Press
or
and then press and hold
3
Press
to select the volume.
Each time the switch is pressed, the vol-
ume level will change between 1, 2, and
3.
When the buzzer volume adjustment is
completed, press
previous screen.
■
Muting a buzzer temporarily (vehi-
cles with color type multi-informa-
tion display)
A mute button will be displayed on the
multi-information display when an object
or pedestrian is detected. To mute the
buzzer, press
.
Vehicles with RCTA function: The buzz-
ers for the Toyota parking assist-sensor
and RCTA function will be muted simul-
taneously.
Mute will be canceled automatically in
the following situations:
●
When the shift lever is changed.
●
When there is a malfunction in a sen-
sor or the system is temporarily
unavailable.
●
When the operating function is dis-
abled manually.
●
When the engine switch is turned off.
●
When the shift lever is in D or S (vehi-
cles with automatic transmission), and
the vehicle speed is 15 km/h (9 mph)
or higher
●
When the Toyota parking assist sen-
sor is turned off once and turned on
again
■
Customization (vehicles with color
type multi-information display)
Some functions can be customized.
(P.683)
to select
.
*
: If equipped
to return to the
■
The driver is solely responsible for
safe driving. Always drive safely, tak-
ing care to observe your surround-
ings.
The RCTA function is only a supple-
mentary function which alerts the
driver that a vehicle is approaching
from the right or left at the rear of the
vehicle. As the RCTA function may
not function correctly under certain
conditions, the driver's own visual
confirmation of safety is necessary.
Over reliance on this function may
lead to an accident resulting death or
serious injury.
RCTA (Rear Cross Traffic
*
Alert) function
The RCTA function uses the
BSM radar sensors installed
on the inner side of the posi-
tion above the rear bumper.
This function is intended to
assist the driver in checking
areas that are not easily visible
when backing up.
WARNING
Cautions regarding the use of
the function
- Quick Links:
- Warning Lights and Indicators
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Hiace and is the answer not in the manual?
Questions and answers
What are the specifications of the engine bearings
Won't move out of Park. Brake lights still work, Can't find an interlock switch. Toyota Granvia 2002 auto
The 2002 Toyota Granvia may not move out of Park due to several possible reasons:
1. Brake Pedal Not Pressed – The shift interlock system requires the brake pedal to be pressed before shifting out of Park.
2. Faulty Brake Light Switch – If the brake light switch is malfunctioning, the system may not detect the brake pedal being pressed.
3. Parking Brake Applied – Ensure the parking brake is fully released.
4. Low Brake Fluid – A low brake fluid level can trigger safety mechanisms preventing shifting.
5. Battery Issues – A weak or dead battery can prevent the shift lock system from functioning.
6. Shift Lock Override – If there is an electrical or mechanical failure, use the shift lock override (usually near the gear shift) to manually release the shifter.
If these steps do not resolve the issue, contact a Toyota dealer or qualified mechanic.
This answer is automatically generated
Which fuse is go Audio & Sat nav also cigarette adapter don’t work
Where is the switch for the inside cab for a 2007 hiace commuter