GE ADTS 405F Mk2 Safety And Installation Manual page 11

6. Cleaning
Clean the external surfaces of the unit using a lint-free cloth and / or a soft
brush. Clean the electrical connector using a soft brush. Remove stubborn dirt
using a damp cloth and mild detergent. Allow to dry.
Note: All cleaning materials are commercially available items. Equivalent
alternatives may be used.
7. Product labelling
[EN] English
CAUTION: DO NOT USE SOLVENTS TO CLEAN THIS EQUIPMENT.
7
The product label for
the ADTS 405F can
found on the front
facing side of the
enclosure.
Product label 1. for
the ADTS 405R can be
found on the front
panel top left corner
recess.
Product label 2 for the
ADTS 405R can be
found on the front
panel top right corner
recess.
The product label for
the ADTS Remote
Terminal can be
found on the rear of
the rubber casing.
124M8686 Revision A