Opening/Closing The Safe; Emergency Opening - HARTMANN TRESORE HS 420 Series Operating Instructions Manual

HARTMANN TRESORE

4 | OPENING/CLOSING THE SAFE

1. Locking the safe (with a 3–6-digit code; see chapter 9)
• Close the door.
• Enter a 3–6-digit code of your choice.
(Code can be reassigned as required each time the safe is locked).
• Press "close".
2. Opening the safe
• Enter the code that was used to lock the safe.
The safe now opens automatically.

5 | EMERGENCY OPENING

In case of emergency, for example if you forget the user code or in the event of a technical mal-
function, you have the option of opening the safe by means of a master code, with the emergen-
cy opening key or with the reader.
1. Emergency opening with master code
• Enter the 6-digit master code. (To obtain it, please contact our
HARMANN TRESORE Service Department).
• The safe opens automatically.
PLEASE NOTE!
!
For your own security, please change the factory code to your own
personal master code without delay (see chapter 8).
2. Emergency opening with emergency-opening key
• The emergency-opening lock is located on the control panel (see chapter 2).
• Insert the emergency-opening key into the lock and turn it anti-clockwise.
• The safe now opens automatically.
3. Emergency opening with reader (CEU)
• Connect the reader to the safe's USB port.
• Select "Emer Open"
• "Mgr Code____''
and press "OK"
• "Sec Code____"
and press "OK"
• "Open" appears in the display and the safe is opened.
!
PLEASE NOTE:
During this operation, the date and time stored in the reader are automatically trans-
mitted to the safe and are stored there.
"OPEN''
"OPEN''
"OPEN''
and press "OK"
appears in the display. Please enter the manager code
to confirm.
appears in the display. Please enter the security code
to confirm.
appears in the display.
appears in the display.
appears in the display.
to confirm.
5
"3333" here
"4444"