Auto Adjustment; Signal Balance - Samsung SyncMaster 320MX User Manual

Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may
relocate it to the center using the horizontal control menu.
Fine
MENU →
→ → [Fine]
→ , → ENTER
Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after
adjusting the frequency (clock speed).
H-Position
MENU →
→ → → [H-Position]
→ , → ENTER
Adjusts the screen location horizontally.
V-Position
MENU →
→ → → → [V-Position]
→ , → ENTER
Adjusts the screen location vertically.

Auto Adjustment

MENU → → ENTER → [Picture] → → → → → → ENTER → [Auto Adjustment ]
The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the
control panel, the auto function is performed.
(Available in PC mode only)
Note
The direct button on the remote control is the 'AUTO' button.

Signal Balance

This is used to make up for the weak RGB signal transmitted by a long signal cable.
MENU → → ENTER → [Picture] → → → → → → → ENTER → [Signal Balance]
Adjusting the LCD Display
→ ENTER → [Picture] →
→ ENTER → [Picture] →
→ ENTER → [Picture] →
→ → → → ENTER → [Image Lock] → ENTER
→ → → → ENTER → [Image Lock] → ENTER
→ → → → ENTER → [Image Lock] → ENTER