Fujitsu Stylistic 3400 Assembly And Use Instructions page 4

To install your Stylistic 3400 pen tablet in the cradle:
1. Insert the key into the cradle lock (reference
Figure 7). While pushing it firmly, turn the key
counter- clockwise to raise the latch to a 90
angle.
2. Slide your system behind the front brackets
and into the tray. It is not necessary to use
force; the weight of the system is sufficient to
provide good contact.
3. Turn the key clockwise to lower the latch into
the locking position. Remove the key and store
in a secure location.
Figure 8. System Installed in Wall Mount
4. When not in use, lift the keyboard tray so that
the magnetic latches attach to the metal striker
plates on the front of the brackets.
4/00
o
Striker
Plates
Magnetic
Latches
Stylistic 3400 is a trademark of Fujitsu PC Corp. © 2000 Fujitsu PC Corp.
Page 4 of 4 58-0710-00A