EUFY BoostIQ RoboVac 15C Manual

EUFY BoostIQ RoboVac 15C Manual

Advertisement

Quick Links

What voltage is RoboVac rated for? Does RoboVac come with a charger that is compatible with
my region?
RoboVac works with voltages from 100 - 240V; a charger for the region is included. If
you want to use your RoboVac in other countries, you will need to use a plug adapter.

Which Wi-Fi networks does RoboVac support?

Supported Wi-Fi networks:
- IEEE 802.11b (Not recommended)
- IEEE 802.11g
- IEEE 802.11n (Support only for 2.4GHz)
RoboVac does not support 5GHz networks.

What should I do if I can't find my Wi-Fi network?

- Make sure you are within range of your Wi-Fi router.
- Make sure your Wi-Fi router is switched on.
- Make sure your smartphone is connected to your Wi-Fi router.
- If the SSID of your network is hidden, manually search for the hidden network you
want to connect RoboVac to.
If these suggestions don't help, please contact us at support@eufylife.com for more
assistance.

What should I do if I can't connect RoboVac to my Wi-Fi network?

1. Make sure the Wi-Fi network name or the password you entered is correct. If it is
incorrect, please try again.
2. Check whether there are any Internet connection problems. If the Wi-Fi signal is too
weak, reset your Wi-Fi router and try again.
3. If there are too many devices connected to your wireless router at once, disconnect a
few devices and try again.
4. Check to see if the side switch on RoboVac is turned on (in the "I" position) and make
sure your RoboVac operates normally.
5. If the issue persists, long-press the Auto cleaning on/off button for 10 seconds to reset
RoboVac. After you hear one beep and see the Wi-Fi status light start to flash, follow the
instructions in the EufyHome app to set up the Wi-Fi connection.

What should I do if RoboVac is offline?

1. Make sure RoboVac's side switch is turned on (in the "I" position) and make sure your
RoboVac is working correctly.
2. Please enter the EufyHome app and wait for 5 seconds to see if RoboVac is back
online.
3. Make sure your Wi-Fi router and phone work properly.
4. If the issue persists, long-press the Auto cleaning on/off button for 10 seconds to reset
RoboVac. After hearing one beep and seeing the Wi-Fi status light start to flash, follow
the instructions in the EufyHome app to set up the Wi-Fi connection.
If these suggestions don't help, please contact us at support@eufylife.com for more
assistance.

Where is it best to use RoboVac?

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BoostIQ RoboVac 15C and is the answer not in the manual?

Questions and answers

Summary of Contents for EUFY BoostIQ RoboVac 15C

  • Page 1 What voltage is RoboVac rated for? Does RoboVac come with a charger that is compatible with my region? RoboVac works with voltages from 100 - 240V; a charger for the region is included. If you want to use your RoboVac in other countries, you will need to use a plug adapter. Which Wi-Fi networks does RoboVac support? Supported Wi-Fi networks: - IEEE 802.11b (Not recommended)
  • Page 2 1. Use only indoors and on dry surfaces. 2. For optimum performance, it is not recommended to use RoboVac on thick or plush carpets (thickness over 1.02 in/26 mm). 3. Do not use on very dark-colored floors. 4. Do not leave trailing cables as RoboVac may become entangled in them. 5.
  • Page 3 POWER STATUS: Breathing orange: Charging Solid blue: Standby / Cleaning / Fully charged Solid orange: Low power and returning to charging base Flashing / Solid red + Beeping: RoboVac has an error Off: - RoboVac is powered off. - To conserve power, the light automatically turns off when RoboVac is not docked to the Charging Base and has been inactive for 1 minute.
  • Page 4 What if RoboVac can't be charged? What should I do? - Check if the indicator on the Charging Base lights up. If not, contact the eufy service center to repair or replace the Charging Base. - Dust off the charging contact pins with a dry cloth.
  • Page 5 - Replace the batteries in the remote control. - Make sure the main power switch on the bottom of RoboVac is in the "I" position. - Make sure RoboVac is fully charged. If these suggestions don't help, please contact us at support@eufylife.com for more assistance.

Table of Contents