Download
Share
Print this page
Samsung SP-D300B Owner's Instructions Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Projector
  5. SP-D300B
  6. Owner's instructions manual

Samsung SP-D300B Owner's Instructions Manual

Hide thumbs Also See for SP-D300B:

Advertisement

Quick Links

Download this manual See also: Owner's Instruction Manual

Advertisement

loading

Related Manuals for Samsung SP-D300B

Summary of Contents for Samsung SP-D300B

  • Page 2 To avoid injuries or damage to property, please read the following precautions carefully and use the product accordingly. Failure to follow the instructions marked with this symbol may cause personal injury or even fatality. Failure to follow the instructions marked with this symbol may cause personal injury or damage to the product or property.
  • Page 3 AWAY FROM THIS PRODUCT AT ALL TIMES. There is a danger of fire. When installing the product in a cabinet or on a shelf, make sure the front end of the base does not protrude. Dropping the product may damage it or cause injury.
  • Page 4 Do not install on an unstable location, or on a stand smaller than the product. Make sure to keep the product out of the reach of children. The product may fall and cause personal injury. In case of thunder/lightning, disconnect the power cord from the wall outlet.
  • Page 5 Service There is a danger of electric shock or fire. If the power plug pin or jack is exposed to dust, water or alien substances, clean it thoroughly. There is a danger of electric shock or fire.
  • Page 6 This marking shown on the product or its literature, indicates that it should not be disposed with other household waste at the end of its working life. To prevent possible harm to the environment or damage to health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources.
  • Page 8 - 4 segment color wheel to implement optimal colors. - 220W Lamp designed to improve luminance Vivid colors - Quality picture tuning focused on improving color - this unit aims at realizing color coordinates that meet broadcasting standards on video production. Minimized fan noise and light leakage - The airflow and fan installation structure are optimized to minimize fan noise and beam leakage.
  • Page 9 You can adjust the screen position by moving the adjustable feet up and down. The buttons on the top of the projector are touch buttons. Touch them lightly with your fingers to use them. The label is attached to the bottom of the product.
  • Page 10 ◐ ○ operation to cool off the inside of the projector. (Lasts for about 1 minute and 30 seconds) Refer to Action 1 below if the cooling fan inside the projector is not in normal operation ◐ ○ ◐ condition.
  • Page 11 When the screen becomes Action 6 darker This Projector uses a cooling fan system to keep the unit from overheating. Operation of the cooling fan may cause noise, which does not affect the product performance and is part of normal operation. Rear Side 1.
  • Page 12 Product Features 1. ON ( Used to turn on the projector. 2. AUTO Adjusts the Picture automatically. (Available in PC Mode Only) 3. MENU ( Used to display Menu Screen. 4. Move (▲ ▼ ◀ ▶)/ ( Used to move to or select each menu item.
  • Page 13 Used to flip or reverse the projected image. 16. P.MODE Used to select Picture Mode. 17. PC Used to switch to PC Mode. Design and specifications of the product may be modified without prior notice for better performance. Specifications Model SP-D300B Size 16.5 mm / 0.65 inch...
  • Page 14 This Class B equipment is designed for home and office use. The equipment has been registered regarding EMI for residential use. It may be used in all areas. Class A is for office use. Class A is for business while class B emits less electromagnetic waves than class A.
  • Page 15 31.5 720x576p 31.25 720x480i 15.73 720x576i 15.63 Supported Resolution/Size Modes ○ : Size & Overscan can be configured, x : Size & Overscan cannot be configured, △ : Size can be configured Source Input Type Mode 1080i 720p 576p HDMI...
  • Page 16 VIDEO & S-VIDEO 480i 1080i 720p 576p 480p 576i 480i 16:9 Mode Mode Overscan : On The position of the screen is not moved in PC input mode. Source Input Type Mode 1080i 720p 576p HDMI 480p 576i 480i VESA...
  • Page 17 If the screen is not vertically installed, the picture on the screen may not be a rectangle. Do not install the screen in bright surroundings. If the screen is too bright, the picture on the screen will not be displayed clearly.
  • Page 18 Screen Size and Projection Distance Install the projector on a flat, even surface and level the projector using the adjustable feet to realize optimal picture quality. If images are not clear, adjust them using the Zoom Knob or Focus Ring, or move the projector forward and backward.
  • Page 19 This projector is designed to show images optimally on a 80 ~ 120 inch sized screen. A. Screen Z: Throw Distance Y': Distance from Lens Center to Image Bottom Setting up the PC Environment - Check the following items before connecting your PC to your projector.
  • Page 20 (For example, [Properties] appears instead of [Properties (R)] as shown in 1.) This unit appliance supports up to 24 bits per pixel in Color quality when it is used as a PC monitor. Projected images may differ from the monitor depending on monitor manufacture or Windows versions.
  • Page 21 Connecting a DVD player/Cable/Satellite Box to HDMI/DVI - Connecting using an HDMI/DVI cable Connect the [HDMI/DVI IN] terminal on the back of the projector and the DVI output terminal of the DVD player/Cable/Satellite box using a HDMI/DVI cable. - Connecting using an HDMI cable Connect the [HDMI/DVI IN] terminal on the back of the projector and the HDMI output terminal of the DVD player/Cable/Satellite box using a HDMI cable.
  • Page 22 Component Ports are marked as (Y/P Connecting to VCR/Camcorder Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT port of video equipment using the video cable. - If the video equipment has S-VIDEO OUT port, connect it to [S-VIDEO IN] input port of the projector.
  • Page 23 Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable. When connections are all completed, connect both power cords of the projector and the PC. This product supports plug and play, therefore you do not need to install a driver on your PC.
  • Page 24 [PC IN] input terminal.
  • Page 25 Screen Adjustment Source List You can select a device connected to the projector to display. 1) Component 2) S-Video 3) Video Edit Name You can edit the names of devices connected to the projector. 1) Component 2) S-Video 3) Video...
  • Page 26 5) Color : Used to adjust color lighter or darker. ▶ You can only adjust Color in [S-Video] and [Video] modes. 6) Tint : Used to obtain more natural color of objects using Green or Red enhancement. ▶ You can only adjust Tint in [S-Video] and [Video] modes.
  • Page 27 ▶ The Black Level can only be selected in [Video], [S-Video] and [HDMI] modes. ▶ For [Video] and [S-Video] Modes 1) 0 IRE : Sets the light level of the darkest portion of the video signal to low. If the setting does not match the input signal, the dark screen looks milky-white.
  • Page 28 Used to set the image brightness by adjusting the amount of light generated by the lamp. 1) Theater : Using this function, you can adjust the light level of the lamp so that you can comfortably watch pictures on the screen even when watching under dark conditions.
  • Page 29 1) Crosshatch : You can check whether the picture is distorted or not. 2) Screen Size : You can refer to picture format sizes such as 1.33:1 or 1.78:1. 3) Red : Red Screen, only for color adjustment. 4) Green : Green Screen, only for color adjustment.
  • Page 30 4) 60 sec LED Indicator This function turns the LEDs On or Off. If the LEDs are affecting the brightness of the LCD, you can turn all the LEDs off by turning off this function. Turning the function on again will allow the LEDs to operate properly again according to the status of the projector.
  • Page 31 It is displayed in the form of an ellipse at the top of the projector . Blue sreen The Blue screen function causes the screen to change to the Blue screen if there is no signal input from the external device connected to your projector.
  • Page 32 Adjust the <Tint> and <Contrast>. Images are not clear. Adjust the focus. Check that the projection distance is either too far or too near to the screen. Strange noise. If a strange sound continues, contact our The operating LED is lit up.
  • Page 33 Default>from the menu.
  • Page 34 - Lamp Type : 220W UHP Check that the power cord is unplugged before replacing the lamp. Even after the power cord has been disconnected, the lamp will be hot. Allow it to cool down for at least 1 hour before changing the lamp.
  • Page 35 Remove the screws as shown in the figure. Assembling a new lamp is in the reverse order of the disassembly. If you have any questions or comments relating to Samsung products, please contact a SAMSUNG customer care center.
  • Page 36 022 - 607 - 93 - 33 PORTUGAL 808 20 - SAMSUNG (7267864) SLOVAKIA 0800-SAMSUNG (726-7864) SPAIN 902 - 1 - SAMSUNG (902 172 678) SWEDEN 075 - SAMSUNG(726 78 64) SWITZERLAND 0848 - SAMSUNG(7267864, CHF 0.08/min) 0845 SAMSUNG (7267864)
  • Page 37 This is the port for connecting a TV antenna using a coaxial cable. It is generally used to watch public broadcast programs. Black Level Black Level sets the light level of the darkest portion of the video signal to match that of the display's black level http://www.samsung.ru http://www.samsung.ua http://www.samsung.com/kz_ru...
  • Page 38 If the setting does not match the input signal, the dark screen is saturated and may not display properly or the dark screen looks milky-white. Cable Broadcast Cable Broadcast broadcasts programs via cable instead of radio waves. To view cable broadcasts, you have to subscribe to your local cable broadcast service provider and install an additional receiver.
  • Page 39 Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

This manual is also suitable for:

D300 - xga dlp business projector