Maintenance
ENGINE OIL
Checking the engine oil level
(Petrol Engine )
Petrol Engine (1.0 T-GDi)
Petrol Engine (1.0 T-GDi)
Petrol Engine (Smartstream G1.2)
Petrol Engine (Smartstream G1.2)
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach
normal operating temperature.
3. Turn the engine off and wait for a few
minutes (about 15 minutes) for the oil
to return to the oil pan.
4. Pull the dipstick out, wipe it clean, and
reinsert it fully.
5. Pull the dipstick out again and check
the level. The level should be between
F (Full) and L (Low).
10-28
Petrol Engine (1.0 T-GDi)
Petrol Engine (1.0 T-GDi)
Petrol Engine (Smartstream G1.2)
Petrol Engine (Smartstream G1.2)
OBI3090003
OBI3090003
If it is near or at L (Low), add enough
oil to bring the level to F (Full). Do not
OBC3090009
OBC3090009
overfill.
Use a funnel to help prevent oil from
being spilled on engine components.
Use only the specified engine oil. (Refer
to "Recommended lubricants and
capacities" in chapter 2.)
OBI3090004
OBI3090004
OBC3090013
OBC3090013
Need help?
Do you have a question about the i20 and is the answer not in the manual?
Questions and answers
I **** using the mechanical key as the key fob has been lost. My question is: How can l lock all the doors when l leave the vehicle as at the present time l have to reach to each door and manually push the lock button on each door? Should l not be able to shut the drivers door and then put the key into the door lock and turn the key counter clockwise or is there another way besides reaching to each door and pushing the lock button on each door.
How to use the Cruise control in my Hyundai i20 Sportz IVT automatic Petrol car?