Page 1
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Customer Care Centre AUSTRIA 0800-SAMSUNG(726-7864) BELGIUM 0032 (0)2 201 24 18 844 000 844 CZECH REPUBLIC Distributor pro Českou republiku: Samsung Zrt., česka organizační...
Contents General Information User Instructions ... 2 Checking Parts ... 4 Using the Stand-Base ... 4 Control Panel ... 5 Connection Panel ... 6 Viewing the Remote Control ... 8 Operation Switching Your Television On and Off ... 9 ...
Checking Parts Owner’s Instructions Warranty Card/ Safety Guide Manual (Not available in all locations) Antenna Cable Scart Cable ➢ Ferrite Core (Power Cord, S-Video) The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug.
Control Panel Front (or Side) Panel ➢ The product colour and shape may vary depending on the model. 1 SOURCE Toggles between all the available input sources (TV, Ext.1, Ext., AV, S-Video, Component, PC, HDMI1, HDMI, HDMI and DTV). ➢ In the on-screen menu, use this button as you would use the ENTER button on the remote control.
Connection Panel Rear Panel ➢ The product colour and shape may vary depending on the model. ☛ Whenever you connect an audio or video system to your set, ensure that all elements are switched off. When connecting an external device, match the colour of the connection terminal to the cable. 1 POWER IN Connect the supplied power cord.
Page 7
9 HDMI IN 1, − No additional Audio connection is needed for an HDMI to HDMI connection. - When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack. ➢ What is HDMI? - “High Definition Multimedia interface” allows the ansmission of high definition digital video data and multiple channels of digital audio.
Exit the on-screen menu b Picture size selection BN68-01422C.indb 8 c Use this when connecting a SAMSUNG DMA (Digital Media Adapter) device through an HDMI interface and switching to DMA mode. (The DMA button is optional.) For more information on the...
Installing Batteries in the Remote Control Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries. ➢ Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. Do not mix battery types, i.e.
Plug & Play Feature When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available. ☛ If you accidentally select the wrong country for your TV, the characters on the screen may be wrongly displayed. ☛...
Page 11
☛ If the country is set to Others, Clock Set screen appears when searching for the analog channel is finished. If the Sweden, Denmark, or Finland is selected, the analog and then digital channels are searched, and the Clock Set is preceded in order.
Using the TOOLS Button You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu changes depending on which external input mode you are viewing. Press the TOOLS button. The Tools menu will appear. Press the ▲...
Editing Device Names You can give a name to the external source. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Input, then press the ENTER button. Press the ▲ or ▼ button to select Edit Name, then press the ENTER button.
Storing Channels Manually ➢ Not available in DTV or external input mode. You can store television channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify.
Adding / Locking Channels ➢ Not available in DTV or external input mode. Using the Channel Manager, you can conveniently lock or add channels. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel, then press the ENTER button.
Sorting the Stored Channels ➢ Not available in DTV or external input mode. This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store. Press the MENU button to display the menu. Press the ▲...
Fine Tuning Channel Reception ➢ Not available in DTV or external input mode. If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually.
Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. Press the MENU button to display the menu. Press the ENTER button to select Picture. Press the ENTER button again to select Mode. Select the required mode by pressing the ▲...
Configuring Detailed Settings on the Picture You can set detailed picture settings. Press the MENU button to display the menu. Press the ENTER button to select Picture. Press the ▲ or ▼ button to select Detailed Settings, then press the ENTER button. Select the required option by pressing the ▲...
Picture Options You can set detailed picture settings. Press the MENU button to display the menu. Press the ENTER button to select Picture. Press the ▲ or ▼ button to select Picture Options, then press the ENTER button. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Page 21
Screen Mode: 1:/Wide Zoom/Zoom/4: When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it.
➢ Optimum condition for pixel shift; Horizontal Dot Vertical Line Time (minute) ➢ The Pixel Shift value may differ depending on the monitor size (inches) and mode. ➢ This function is not available in the Just Scan mode. − White: This function helps remove after images on the screen by changing the colour of pixels to white.
If you play a game or watch TV while wearing the 3D glasses for long periods of time, you may experience eyestrain or a headache. 3D glasses (including the Emitter) not manufactured by Samsung may not be supported. If you find the screen flickering while the 3D function is used, change the environmental lighting ...
Changing the Format Select the optimal input format to match your graphic cards or 3D software. See the descriptions for Steps 1 to 4 above. Press the ▲ or ▼ button to select Format, then press the ENTER button. Press the ▲ or ▼ button to select Checker Board, Horizontal or Vertical then press the ENTER button.
Sound Features Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound, then press the ENTER button. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. Available options: Mode, Equalizer, SRS TS XT, Auto Volume, TV Speaker When you are satisfied with your setting, press the ENTER...
Selecting the Sound Mode The DUAL I-II button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “DUAL-I” or “Stereo”, depending on the current transmission. Easy Setting Press the TOOLS button on the remote control. Press the ▲...
Time Features Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Press the ▲ or ▼ button to select Time, then press the ENTER button. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Language / Melody / Light Effect / Entertainment / Energy Saving Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTER button. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) Right click the mouse on the Windows Desktop, then click on Properties.
Input Mode (PC) Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: D-Sub Input Mode Resolution 640 x 350 720 x 400 640 x 480 640 x 480 640 x 480...
Setting the PC ➢ Preset to the PC mode by pressing the SOURCE button. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Picture, then press the ENTER button. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Previewing the DTV Menu System ➢ A vailable in DTV mode. Preset to the DTV mode by using the TV/DTV button on your remote control. To help you navigate around the on-screen menu system and adjust the various settings available, refer to the following illustration.
Language Audio Language Subtitle Language Teletext Language Preference ➢ The sub-items of the CI Menu may vary depending on the CAM model. (refer to page 42) Displaying Programme Information While viewing a channel, additional information about the current programme may be displayed. While viewing a programme, press the INFO button.
Page 34
1. Auto Store You can update the channel list when the broadcaster adds new services or if you move the TV to a new location. Press the ENTER button to select Auto Store. Choose system to scan by pressing the ▲ or▼ button, then press the ENTER button.
Page 35
Press the red button to start the scan for digital services. When it has finished, channels are updated in the channel list. ➢ You can input by pressing the button on the remote control. ➢ You can not change only frequency and when changing a channel the Frequency will be automatically changed.
Page 36
1.5 Channel List You can display a list of all channels or your favourite channels. Press the ▲ or ▼ button to select Channel List, then press the ENTER button. ➢ It can be displayed simply by pressing the CH LIST button.
Page 37
To view programme information, press the ▲/▼/◄/► button to select a programme of your choice, then press the INFO button. ➢ Information such as the channel number, programme title and running time, status bar, and brief summary of the highlighted programme will be displayed in the top right corner of the screen.
Page 38
.4 All Channels and Favorite Channels In the EPG menu, you can display all channels or favourite channels. Press the green button repeatedly to toggle between the all and favourite channels list. When the favorite channel list has not been set up: −...
Page 39
. Preference This menu consists of 6 sub-menus: Primary Audio Language, Secondary Audio Language, Primary Subtitle Language, Secondary Subtitle Language, Primary Teletext Language, and Secondary Teletext Language (depending on the Country). Using this feature, users can select one of the languages (English, German, Italian, Swedish, French, Welsh, Gaelic, Irish, Danish, Finnish, Spanish, Dutch).
Page 40
4. Setup This menu consists of 11 sub-menus: Menu Transparency, Change PIN, Parental Lock, Subtitle, Subtitle Mode, Audio Format, Audio Description, Digital Text, Time Zone, Common Interface and System. 4.1 Menu Transparency You can set the translucency of the on-screen menu. Press the ▲...
Page 41
4. Subtitle / Subtitle Mode / Audio Format / Audio Description / Digital Text You can use various settings to suit your personal preferences. Press the ▲ or ▼ button to select required menu (Subtitle, Subtitle Mode, Audio Format, Audio Description or Digital Text), then press the ENTER button.
Page 42
Upgrade, and Reset. − Product Information You can view your product information. For service or repair, please contact a Samsung approved dealer. Press the ENTER button with Product Information selected. The product information menu is displayed. − Software Version / Firmware Version −...
Page 43
− Software Upgrade (Option) To keep your product up-to-date with new digital television features then software upgrades are periodically broadcast as part of the normal television signal. It will automatically detect these signals and display the software upgrade banner. You are given the option to install the upgrade. Software Inforamtion Press the ENTER button, then the current software version is shown.
What is Anynet + ? Anynet + is an AV network system that enables an easy-to-use AV interface for users by controlling all connected AV devices through the Anynet + menu when Samsung Electronics AV devices are connected. Connecting Anynet + Devices The Anynet + system supports AV devices supporting Anynet + only.
Setting Up Anynet + The following settings are to use Anynet + functions. Using the Anynet + Function Press the MENU button to display the menu. Press the ▲ or ▼ button to select Input, then press the ENTER button. Press the ▲...
Anynet + Menu The Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV. Anynet + Menu View TV Select Device Record Menu on Device Device Operation Receiver Setup TV Remote Control Buttons Available in Anynet + Mode Device Type Anynet + Device Device with built-in Tuner...
Listening through a Receiver You can listen to sound through a receiver instead of the TV speaker. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Input, then press the ENTER button. Press the ▲ or ▼ button to select Anynet + (HDMI-CEC), then press the ENTER button.
Teletext Feature Most television stations provide written information services via teletext. The index page of the teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons. ☛...
Page 49
The teletext pages are organized according to six categories: Part Contents Selected page number. Broadcasting channel identity. Current page number or search indications. Date and time. Text. Status information. FASTEXT information. ➢ Teletext information is often divided between several pages displayed in sequence, which can be accessed by: ...
Samsung is not liable for these kinds of accidents. ➢ Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
Wall- mount adjustment (Sold separately) Once the auto wall mount is installed, the position of your TV can be easily adjusted. Rear Panel Serial Cable(1P to 1P)(Not supplied) Entering the menu Press the ▲, ▼, ◄ or ► button on your remote control. ➢...
Install Wall Mount with the torque range of 15kgf·cm or less. Make sure that parts can be damaged if the torque is out of the specified range. Accessory Kit contains Holder–Ring [①] for installing other company’s Wall-Mount on Samsung TV. (Case B)
Securing the TV to the Wall Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death.
Troubleshooting Before contacting the Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. No sound or picture ...
Specifications The descriptions and characteristics in this booklet are given for information purposes only and are subject to modification without notice. Model Name Screen Size (Diagonal) PC Resolution Sound (Output) Dimension (WxHxD) Body With stand Weight Body With stand Environmental Considerations Operating Temperature Operating Humidity...
Page 56
This page is intentionally left blank. BN68-01422C.indb 56 2008-06-03 오전 11:35:33...
Page 57
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.