Basic Operations; Power On Sequence - Esko Kongsberg X Series User Manual

7

7. Basic Operations

7.1. Power On Sequence

Ensure the table is free from obstructions and ready for operation.
Follow these steps to power up the system and get ready to work:
1
2
3
4
5
38
Keep away from Moving Parts during operation.
Do not lean on Racks, Guide Ways or Traverse during operation, as this may cause
personal injury.
Before starting any operation, make sure that:
• The Table is free from obstructions
• No unauthorized personnel come close to the table
Front End PC
Switch on the PC and the monitor.
Table Power
Switch the table on using the Main Power Switch.
Note: After power off, wait minimum 5 sec. before the system is switched on
again.
iPC
From Desktop, double-click the icon for iPC
Check that no error message indicates faulty conditions.
Safety System
Reset the Safety System by pressing the Pause pushbutton.
Servo Power
Press the Servo On pushbutton.
Kongsberg X-series