Advertisement
Number relating to picture
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
BOX CONTENTS - Check the contents of the box are correct
Item
Front Plate
Lever Handles x 2
Inside Lever Boss
Spindle + Spacer
Front Patch Fitting (LH or RH)
2 Piece Internal Latch Patch fitting (with Gasket)
Batteries x 4 'N cell'
Front Plate Cylinder Keys
Through Fixing Allen bolts x 2
Patch Fixing Allen bolts x 2 (short)
Internal Patch Steel Cover Plate
Strike Plate
Allen Keys
Front Plate Cylinder Cover
Classroom Function Tailpiece
CL4000GD
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Advertisement
Table of Contents
Related Manuals for CODELOCKS 4000 Series
Summary of Contents for CODELOCKS 4000 Series
- Page 1 Number relating to picture Item CL4000GD Front Plate Lever Handles x 2 Inside Lever Boss Spindle + Spacer Front Patch Fitting (LH or RH) 2 Piece Internal Latch Patch fitting (with Gasket) Batteries x 4 'N cell' Front Plate Cylinder Keys Through Fixing Allen bolts x 2 Patch Fixing Allen bolts x 2 (short) Internal Patch Steel Cover Plate...
- Page 2 TOOLS REQUIRED Philips Screwdriver Installation of Glass Door Lock You should familiarise yourself with the lock and its operation before attempting to fit. Locks are supplied as either RH or LH versions, check you have the correct product to suit the hand of your door. The diagram below shows RH version.
- Page 3 9. The spindle supplied is suitable for glass doors up to 15mm thick. For doors thicker than 15mm please install the spacer piece provided onto the long end of the spindle. Now take the internal latch patch fitting and pass the spindle through the latch follower with the short end facing the code side.
- Page 4 Electronic Digital Patch Lock Template 3.5mm 16.5mm 142.5mm 159mm 45mm 45mm 10mm 60mm 61mm...
Need help?
Do you have a question about the 4000 Series and is the answer not in the manual?
Questions and answers