CODELOCKS CL5510 Getting Started Manual

Codelocks Support
CL5510 - Getting Started Guide
Notice: The C3 Smart App replaced the K3 Connect App on February 14, 2023. For more information on
how to download, set up and use C3 Smart with your Codelocks Smart Locks,
visit: c3smart.net or contact Codelocks Support.

About Codelocks Smart Locks

The CL4500 and CL5500 locks can be operated and managed directly via the keypad or via a compatible
smartphone by downloading the C3 Smart App. This Getting Started Guide contains the common functions to
enable you to quickly program your lock.
For detailed instructions, refer to the Programming + Operating Instructions online at:
codelockssupport.com/smartlocks

The Basics

Master Code

The factory set Master Code is #12345678. This should be changed immediately after installation (Program 01).
The Master Code (and Sub-Master Code if set) always start with the # button. This puts the lock into
Programming Mode.

Programming

Each programming sequence starts with the #Master Code or #Sub-Master Code. The singular
throughout the sequence represent an acceptance flash; the keypad will illuminate blue to confirm a correct input.
At the end of a sequence, the keypad will flash twice • • confirming it's complete and programming has been
successful.

Access Methods

The lock supports a maximum of 350 Clients (users): User Codes (100), User Cards (150) and User Compatible
https://codelocks.zohodesk.eu/portal/en/kb/articles/cl5510-getting-started-guide-1-2-2023
• blue dots