Related Manuals for DeDietrich Easymatic
Summary of Contents for DeDietrich Easymatic
- Page 1 E Control panel English Package MA2 [Easymatic] 03/14/08 Please read these instructions and retain for future reference Instructions for use, Electrical connection, Start up 94862243...
-
Page 2: Table Of Contents
CONTENTS 1. GENERAL ................3 1.1 Presentation . -
Page 3: General
- 1 E control panel control panel can be used for: - 1 Easymatic regulator with support to be installed in - automatic operation of heating when the ambient the chosen room or to be included in the control panel... -
Page 4: Description
"summer" mode for the period during which the 90°C / 86°F to 194°F (original stop at 75°C / 167°F). heating is to be cut off. - during automatic operation by the Easymatic regu- lator, put the thermostat to the AUTO position D. 2-position switch (between the 7 and 9 marks). - Page 5 ● Easymatic regulator Flap open MODE M O D N D A S T A PROG PROG STANDARD 8575N077 8575N078 1. Temperature adjustment keys (green keys) To force heating of the domestic hot water tank out- "comfort" temperature side the d.h.w. time program (if a calorifier is connected).
-
Page 6: Choosing The Operating Mode
”com- This position enables automatic regulation and fort” temperature setting for 2 hours. operation by the Easymatic regulator. The display remains identical, but the pump is perma- nently off. The symbol is no longer displayed. -
Page 7: Heating And Domestic Hot Water Set Temperatures
4. HEATING AND DOMESTIC HOT WATER SET TEMPERATURES : ”comfort” temperature : ”reduced” temperature : "domestic hot water" temperature MODE 8575N079 Heating set temperature Tempe- Factory Setting range rature setting Temperatures for "comfort" periods (dark area in the graphic bar) and for "reduced" periods (light area in the Comfort 5 to 30°C / 41°F to 86°F graphic bar) can be adjusted as follows:... -
Page 8: Programing
6. PROGRAMING 6.1 Factory programing Heating program Monday to Sunday: 6 a.m. to 10 p.m. : Comfort period Domestic hot water calorifier program Monday to Sunday: 5 a.m. to 10 p.m. : Loading allowed 6.2 Program customization Customized programs ● HEATING PROGRAM Enter customized programs in the adjacent tables, then save them as follows: "Comfort"... -
Page 9: Messages - Alarms
7. MESSAGES - ALARMS In the event of any malfunction, the following messages may appear on the display: MESSAGE FAULT PROBABLE CAUSE REMEDY A A L L S S 0 0 Boiler sensor The corresponding Switch off the electrical power supply to the boiler using the A A L L S S 1 1 External sensor sensor... -
Page 10: Startup Or Restart After A Prolonged Stop
8. STARTUP OR RESTART AFTER A PROLONGED STOP Initial starting up shall be performed by the fitter. Before turning the boiler on, make sure that the instal- lation is filled with water. Startup in the chronological order described below: °C 8578N007 ●Check that the switch D is in the AUTO position. - Page 11 8578-4017 E (EASYMATIC) control panel Spare parts for GT 120 A-GT 1200 A Note : when ordering spare parts, do not forget to provide the code number given in the list opposite the part reference. 23 24 29 28 20 21...
- Page 12 E (EASYMATIC) control panel DHW SENSOR OPTION ( PACKAGE FM 45) EXTERNAL SENSOR 85757741...
- Page 13 E control panel Mark. Code No. DESCRIPTION Mark. Code No. DESCRIPTION 8575-4911 EPT2-pin connector room sensor CONTROL PANEL 8578-7001 Complete Easymatic co ntrol panel 8575-4928 EPT connector RT 8578-8506 Complete Easymatic card cover 8575-5520 Control panel screw bag 9786-4039 Easymatic front panel...
- Page 16 www.dedietrich-boilers.com...
- Page 17 ASSEMBLY, ELECTRICAL CONNECTIONS AND FITTER SETTINGS De Dietrich Thermique S. A. Niederbronn, FRANCE E control panel This page is reserved for use by the fitter Assembling the control panel Installing the boiler sensor • • Refer to the yellow assembly sheet provided with the Refer to the yellow assembly sheet provided with the boiler instructions.
- Page 18 • Installing options Refer to the instructions delivered with the option. ELECTRICAL CONNECTIONS Electrical connections shall be made respecting the Electrical connections shall be carried out information given on the electrical diagrams delivered by a qualified professional only. with the equipment and the directives given in the The electrical wiring has been carefully instructions.
- Page 19 Basic connections SENSOR S AMB S ECS S CH S EXT 21 20 21 20 21 20 21 20 19 18 19 18 19 18 19 18 17 16 17 16 17 16 17 16 15 14 15 14 15 14 15 14 23 22 23 22...
- Page 20 Boiler Control Connections & Options SENSOR S AMB S AMB S AMB S AMB S ECS S ECS S ECS S ECS S CH S CH S CH S CH S EXT S EXT S EXT S EXT 23 22 23 22 23 22 23 22...
- Page 21 INSTALLING THE EASYMATIC REGULATOR IN THE LIVING ROOM 1. Choose the position The remote control will be installed adjacent to an internal partition, about 1.5 m above the floor in a judi- ciously chosen "control" room. Locations in the room that are not recommended...
- Page 22 INSTALLING THE EASYMATIC REGULATOR IN THE BOILER CONTROL PANEL • Electrical connection If you do not want to install the Easymatic regulator in In this case, you must install and a living room, you can install it in the boiler control connect the external sensor to the panel by proceeding as follows.
- Page 23 "FITTER" SETTINGS The settings given below are applicable to Note: various functions and the installation confi- The various parameters and settings are memorized guration. They can only be modified by qua- even after a power failure. lified professional. MODE PROG PROG STANDARD 8575N078...
- Page 24 PROG circuit 100 to 200°F PROG Self-adaptivity 0 = blocked (only with the Easymatic control module 1 = released installed in the heated volume) Influence of the ambiance sensor 0 to 10 PROG (only with easymatic control module installed 0 to 10...
- Page 25 Further information about various parameters Parameter 1 Parameter 8 BOILER TEMPERATURE ROOM SENSOR INFLUENCE To display the boiler water outlet temperature. To enable adjustment of the influence of the room sen- sor on the boiler water temperature. 0 : the room sensor is ignored Parameter 3 (for example remote control badly positioned) 1 : taken into account slightly...
- Page 26 Parameter 11 Parameter 15 EXTERNAL FROST FREE CDC MEMORY CHECK Below this temperature, the pumps run continuously To display the memory number used on a communica- and the minimum circuit temperature is respected. For ting remote control. Night Off operation (setting 0), Night Off mode (setting 1) becomes active.
- Page 27 SKELETON DIAGRAMS...
- Page 28 Bp 30 – 57, RUE DE LA Gare F – 67580 MERTZWILLER Tel: +33/3/88/80/27/00 – Fax: +33/3 88 80 27 99 Ni IRC : 347 555 559 RCS STRASBOURG www.dedietrich-thermique.com DDR AMERICAS INC In Canada: In USA or South America: 1090 Fountain St., Unit #10...
Need help?
Do you have a question about the Easymatic and is the answer not in the manual?
Questions and answers