Contents Important Information Safety and Recommendations Warnings Parts List IVVI Stroller How to Set Up the IVVI Stroller How to Use the IVVI Stroller IVVI Bassinet How to Set Up the IVVI Bassinet How to Use the IVVI Bassinet with the IVVI Stroller Accessories IVVI Infant Car Seat Post Adapters IVVI Infant Car Seat Ring Adapter...
The IVVI bassinet is a patented product and complies with OF THE BASSINET. US safety standards, ASTM 2194 and ASTM F2050. If you have any questions or comments regarding the IVVI totl system, we will be glad to hear them through our website nuna.eu...
Negotiate curbs and rough ground carefully. Repeated Use original Nuna parts and accessories only. impact will cause damage to this product. This stroller is to be used only at walking speed. Product is not intended for use while jogging, skating, etc.
Page 5
27 in. (68 cm) or less. Overloading, incorrect folding, and using accessories other than those approved by Nuna, e.g. child seats, bag FALL HAZARD To help prevent falls, do not use the hooks, rain covers, buggy boards, etc., may damage or bassinet when the infant begins to push up on hands make this stroller unsafe.
Page 6
Use the infant car seat adapters only with the IVVI stroller DO NOT use the toddler handle to carry bags or any and approved Nuna PIPA infant car seat. ™ heavy items. Any load attached to the toddler handle DO NOT exceed the maximum weight limit specified for affects the stability of the stroller.
Parts List Make sure all parts are available before assembly. If any part is missing, please contact Nuna (see page 39 for information). No tools are required for assembly. CHOKING HAZARD: Remove and immediately discard protective end caps from each wheel and wheel hub axle.
How to Set Up the IVVI stroller Check that you have all the parts for this product before using it. The assembly should be performed only by adults. Open Stroller - Rotate handle up. - Align the sides of the seat with the seat mounts. Place the seat directly down until it clicks into place.
Page 9
Assemble Canopy - Clip the canopy mounts onto the seat. - Then close the zippers. - To remove the canopy, open the zippers, then remove the canopy mount. Assemble Armbar - Align the armbar ends with the armbar mounts, and then insert to lock.
How to Use the IVVI stroller Secure Child - To release the buckle latch, push on center button and remove the clips. - To secure child, assemble buckle. - Connect shoulder buckle and hip buckle together as shown, and together secure in buckle latch. - Repeat on opposite side.
Page 11
Switch Seat The seat can be switched to face front or to face the parent. - Squeeze the seat release buttons (1) while lifting the seat (2). - Turn the seat the reverse direction and align the sides of the seat with the seat mounts. Place the seat directly down until it clicks into place.
Page 12
Brake - To lock wheels, step on brake lever and push down. - To release wheels, step on the brake lever and push forward. Always apply brake when stroller is in stopped position. Adjust Calf Support The calf support has 2 positions. - To raise the calf support, push it up.
Fold Stroller Remove stroller seat before folding. - Lift the folding button (1) and rotate the handle forward (2). - Lift the webbing in the basket of the stroller to transport after folding. How to Set Up the IVVI Bassinet Assemble Bassinet - Open the wire support on both sides of the bassinet.
Adjust Canopy - Pull canopy towards front end to secure. Be sure the handle is locked in the forward most upright position before lifting bassinet by the handle. Close the canopy by pressing the folding buttons on both sides. (1) Canopy Features - Fold the rear panel of the bassinet canopy up for more ventilation.
Remove Bassinet - Press release buttons on both sides of bassinet and then lift up. Accessories Not all accessories are included on some models. IVVI Infant Car Seat Post Adapters* *car seat not included - To attach infant car seat post adapters, place post adapters onto seat mounts as shown.
IVVI Infant Car Seat Ring Adapter* *car seat not included - Slide the two pieces of the ring adapter together until you hear a click. Pull outwards on either end to ensure the attachment is secure. - To attach ring adapter, place adapter onto seat mounts as shown.
IVVI Stroller Rain Cover - To assemble the rain cover, place it over the stroller seat. Always check ventilation, when the rain cover is on the product. Always check that the rain cover has been cleaned and dried before folding. Do not fold the stroller after assembling the rain cover.
- Reassemble shoulder harness pads and crotch covers on the stroller. - Zip on the front cover of the footmuff. - Fold down footmuff flap over the stroller armbar, securing with magnets. IVVI Stroller Child Tray & Toddler Handle - To attach child tray, align with hole on stroller frame and push down until it “clicks”.
IVVI Stroller Removeable Basket - Open removeable basket. - Place removeable basket into stroller basket (1) and secure around stroller basket with magnets (2). - Removeable basket can be used as takeaway storage.
Warranty, Product Cleaning and Maintenance Registration and Contact Your IVVI totl system is a valuable piece of equipment and deserves careful handling. Warranty You can clean the frame, plastic parts, and fabric with a We have purposely designed our high-quality products so damp cloth, but do not use abrasives or bleach.
Page 21
United States: Nuna Baby Essentials Inc. 70 Thousand Oaks Blvd. Morgantown, PA 19543 1.855.NUNA.USA (1.855.686.2872) nuna.eu...
Need help?
Do you have a question about the IVVI totl and is the answer not in the manual?
Questions and answers