SingTel SingNet eVolve Business Fibre Broadband Troubleshooting Manual page 16

The router also supports the following ports and one reset button on the rear panel:
Items
LAN Ports
Internet (WAN) Port
Reset Button
Power Inlet
To reboot:
Steps Description
Press the Reboot button to refresh the Router.
Step 1
Step 2 Click OK to reboot the device.
Step 3 The reboot will be complete when the screen prompts for login.
Note: If you use the reset button on the back panel, the Router performs a power reset. If
the button is pressed for over 6 seconds, the factory default settings will be restored. Please
ensure that you have noted down your previous settings before resetting the router.
Description
Gigabit Ethernet ports (RJ-45). Connect devices on your local area
network to these ports (i.e., a PC, hub, or switch).
Gigabit Ethernet port (RJ-45). Connect your Ethernet PPPoA/PPPoE link to
this port.
Use this button to reset the Router and restore the default factory settings.
To reset without losing configuration settings, refer to the Reboot settings
below.
Connect the included power adapter to this inlet. Using the wrong type of
power adapter may cause damage.
16