Table of Contents
Advertisement
G
COPY button (23)
Press to print another copy of the previous printout.
You can make only one copy each time you press
this button regardless of the print quantity set using
the menu.
H
OPEN button (14, 23)
Press to open the door panel. While a print job is in
progress, press to cancel the print job.
I
Paper cutter
Cuts the paper as each image is printed.
Rear Panel
A
DC connector
Use DC connectors made by Hirose Electric Co.,
Ltd.
Connector name: RM12BPE-4S(71)
Cables: The use of cables of length 1.5 m or shorter
meeting the following specifications is
recommended (60 V voltage rating or higher, 7.5 A
current rating or higher, AWG 20 conductor size or
larger).
12 V to 24 V DC
12 V to 24 V DC
For the DC power supply, be sure to use a device
that complies with the IEC 60601-1 standard and is
protected by double insulation or reinforced
insulation.
Be sure to use a power supply device capable of
supplying a voltage of 12 V to 24 V and a current of
8.2 A (at 12 V) to 3.7 A (at 24 V) or more.
However, the device should not be capable of
supplying 240 VA for 60 seconds or more (20 A or
less at 12 V, 10 A or less at 24 V).
Use of power supply devices other than the above
may result in fire or electric shock.
Class I devices should only be connected to a power
outlet that is properly earthed to avoid the risk of
electric shock.
For information on shutting off the main power
supply, refer to the instructions for use supplied
with the power supply device. If the information is
not available for whatever reason, obey the
following for the power supply device.
• To shut off the main power, disconnect the power
plug from the outlet.
• When installing the unit, incorporate a readily
accessible shutoff device in the fixed wiring, or
connect the power plug to a power outlet near the
unit that can be easily accessed during use.
• Do not install the ME unit in a position that will
make unplugging the power plug difficult.
• If a malfunction occurs, cut power via the shutoff
device, or disconnect the power plug from the
outlet.
B
USB connector (11)
Connects to a computer equipped with the USB
interface, using a USB cable compatible with
Hi-Speed USB (sold separately). Do not use USB
cables of length 3 m (9 feet 10 inches) or longer.
GND
GND
10
Warning on power supply devices
Hide quick links:
Advertisement
Table of Contents
