Table of Contents
Advertisement
2. Installation
2.
Installation of posts & panels
-
Installation principle: when placing square posts,
first all the posts can be placed and then the
panels can be attached.
ALIGNING THE POSTS
Installation on an even surface
-
Place a pin before the first post of the fence and
another behind the last post. Connect those posts
with two guide ropes.
-
The lower guide rope should be between 20 and 40
cm above the ground. Now align all inserts with the
upper guide rope.
Installation on a sloping surface
-
Place a guide rope for the same heights. In case of a
difference in height, place a supplementary guide
rope at the height of the upper insert.
12
18/05/2020 – Nylofor / Twilfix
- Installation manual
®
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Nylofor-Twilfix and is the answer not in the manual?
Questions and answers