Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Betafence Nylofor square post
Summary of Contents for Betafence Nylofor square post
- Page 1 Nylofor ® Installation manual Securing What Matters...
- Page 2 Square & Bekafix Bekafix Super Quixolid Plus ® ® ® rectangular posts Nylofor ® 4 post systems 28/10/2019 – Nylofor ® - Installation manual...
-
Page 3: Table Of Contents
0. Contents Components of the fencing systems The posts Square posts & rectangular posts Bekafix Bekafix Super Quixolid Plus Fixators and tools Square posts & rectangular posts Bekafix Bekafix Super The Nylofor panels Installation of the fencing systems Foundations Installation of posts & panels Square posts &... -
Page 4: Components Of The Fencing Systems
1. Components of the fencing systems The posts Square & rectangular posts Post with section 60x60x1.5mm are available for panels from 0.6 to 2.4 meters For installations higher than 2.4m, rectangular posts with profile 80x60x2,5mm, or 120x60x3mm are used The posts are galvanized inside and outside and polyester coated This type of post can be installed with all Nylofor panels The posts are equipped with M6 inserts to attach the panels with clamps and security bolts... -
Page 5: Bekafix
1. Components of the fencing systems The posts Bekafix Profile 70x44x1.25mm Posts are available for panels from 0.6 to 2.4 metres The posts are galvanised inside and outside and polyester coated This type of post can be installed with Nylofor 3D, 3D Pro, 3D Pro XL, 3D Super, 2D, 2D Super, F panels Each post has 3 holes for attachment of the clamps with security bolts. -
Page 6: Bekafix Super
1. Components of the fencing systems The posts Bekafix Super Profile 100x54,5x2mm Posts are available for panels from 2 to 4.1 metres The posts are galvanised inside and outside and polyester coated This type of post can be installed with Nylofor 3D, 3D Super, 2D, 2D Super, F panels Each post has holes every 150 mm for attachment of the... -
Page 7: Quixolid Plus
1. Components of the fencing system The posts Quixolid Plus Profile 75x50x1mm (steel S 350) Post without accessories. After installation, the panel is secured by the inner folding of the profile (blocks the panel nose) Posts are available for panels from 0.6 to 2.4 m The posts are galvanised inside and outside and polyester- coated This type of post can be installed with Nylofor 3D, 2D, 2D Super,... -
Page 8: Fixators And Tools
1. Components of the fencing system Fixators and tools Square posts PA fixators with caps, to be attached with M6 security bolts (ISO 7380) Different types are available, depending on the type of panel being installed – – 2D Super –... -
Page 9: Bekafix
1. Components of the fencing systems Fixators and tools Bekafix PA fixator to attach the panel to the post at the side. PA clamps are clicked into the perforations in the post. There are fixator compatible with Nylofor 3D/ 3D Pro/ 3D Pro XL Steel fixators to attach the panel to the post at the side. -
Page 10: Bekafix Super
1. Components of the fencing systems Fixators and tools Bekafix Super Steel fixators to attach the panel to the post at the side. The clamps are clicked into the perforations in the post. For extra security they can be fixed with M6x60 mushroom head square neck bolts, washer M6 and breaking-off nut M6 (stainless steel). -
Page 11: The Nylofor Panels
1. Components of the fencing systems The Nylofor panels - Range: Type 3D Pro Super Super Height 1,03 – 1,03 – 1,03 – 1,63 – 0,63 – 1,03 – 2,43 m 2,43 m 2,03 m 2,43 m 2,03 m 2,43 m Width 2,5 m 2,5 m... -
Page 12: Installation Of The Fencing Systems
2. Installation of the fencing systems Foundations To obtain the best result, it is advisable to level the ground over the whole length of the fence For correct positioning, maintain the centre-centre distances. The distance is determined by the post system and the type of panel being installed Centre-centre distance table Post system Panel width... -
Page 13: Installation Of Posts & Panels
2. Installation of the fencing systems Installation of posts & panels Square posts Installation principle: when placing square posts, first all the posts can be placed and then the panels can be attached. ALIGNING THE POSTS Installation on an even surface Place a post before the first post of the fence and another behind the last post. - Page 14 2. Installation of the fencing systems Installation of posts & panels Square posts PLACEMENT OF THE POSTS (USE A TEMPLATE) A template makes it much easier to place the posts correctly The template must be made by the installer and must have 2 recesses into which the posts fit perfectly Place the posts, correctly aligned (vertically and horizontally) and with the correct distance between them.
- Page 15 2. Installation of the fencing systems Installation of posts & panels Square posts INSTALLATION OF THE PANELS Join two panels together on an intermediate post at the correct height FIXATORS PER POST Place a clamp in the upper insert of the post and tighten the Panel height Number of security bolt halfway...
- Page 16 2. Installation of the fencing systems Installation of posts & panels Square posts MAKING CORNERS RIGHT ANGLE ACUTE/OBTUSE ANGLE Nylofor 3D / 3D Pro Place two intermediate posts 50 cm from the corner. 28/10/2019 – Nylofor ® - Installation manual...
- Page 17 2. Installation of the fencing systems Installation of posts & panels Square posts PANELS ON TOP OF EACH OTHER Connect the panels using SLOPES 3 brackets per panel On slopes extra fixators must be placed Measure the area accurately compared to the zero level Do this in different places The zero level can be determined by means of a...
- Page 18 2. Installation of the fencing systems Installation of posts & panels Square posts INSTALLATION WITH CONCRETE SLABS Use concrete slab supports for 60x60 posts (hard PVC) width 4cm – height 30cm 18 28/10/2019 – Nylofor ® - Installation manual...
-
Page 19: Bekafix
2. Installation of the fencing systems Installation of posts & panels Bekafix Installation principle: Bekafix posts are installed according to the ‘post-panel-post’ system ATTACHMENT OF THE CLAMPS - Start by attaching one panel to a post on each side - Hook the panel into the hook caps to help hang it up - To attach the panel the panel is lifted from the hook cap and a polyamide or metal fixator is attached below the upper nose, so that once attached the panel no longer rests on the hook... - Page 20 2. Installation of the fencing systems Installation of posts & panels Bekafix PLACING THE POSTS IN CONCRETE - The panel, mounted onto the 2 posts, is inserted into the foundation holes. The panel must be aligned with the fence line. The panel height must also be aligned - Fill the foundation holes with moderately wet concrete (not liquid).
- Page 21 2. Installation of the fencing systems Installation of posts & panels Bekafix NUMBER OF FIXATORS PER POST Panel height # fixators # fixators intermediate end post /corner post 630mm 1030mm 1230mm 1430/1530mm 1630/1730mm 1830/1930mm 2030mm 2430mm 28/10/2019 – Nylofor ® - Installation manual...
- Page 22 2. Installation of the fencing systems Installation of posts & panels Bekafix MAKING CORNERS The corner posts are placed on the line with the bisector of the right or obtuse angle to be made. For an acute angle the post with the panel making the acute angle is placed into the same foundation hole as the last line post.
- Page 23 2. Installation of the fencing systems Installation of posts & panels Bekafix INSTALLATION ON SLOPES When building a fence on a slope using the Bekafix post it is best to start at the highest point of the site Where the site slopes, the next panel should not be hooked into the hook cap;...
- Page 24 2. Installation of the fencing systems Installation of posts & panels Bekafix INSTALLATION WITH CONCRETE SLABS width 4cm – height 30cm 28/10/2019 – Nylofor ® - Installation manual...
-
Page 25: Bekafix Super
2. Installation of the fencing systems Installation of posts & panels Bekafix Super Installation principle: Bekafix Super posts are installed according to the ‘post-panel-post’ system ATTACHMENT OF THE FIXATORS Start the installation by attaching posts to both sides of one panel Hang the panel on the hook cap to position Attach the fixators using the Bekafix Super tong... - Page 26 2. Installation of the fencing systems Installation of posts & panels Bekafix Super PLACING THE POSTS INTO CONCRETE Place the first 2 posts in the foundation holes and fill them with moderately wet concrete (not liquid). The concrete is pressed firmly, which allows the panel to stand upright without support.
- Page 27 2. Installation of the fencing systems Installation of posts & panels Bekafix Super NUMBER OF FIXATORS PER POST Panel height # fixators # fixators intermediate end post /corner post 2030mm 2430mm 3100mm 3600mm 4100mm 28/10/2019 – Nylofor ® - Installation manual...
- Page 28 2. Installation of the fencing systems Installation of posts & panels Bekafix Super MAKING CORNERS Corners can always be made by placing 2 posts in the correct angle In many cases a single post can be used. Look for your system and desired angle in the description that follows 28/10/2019 –...
- Page 29 2. Installation of the fencing systems Installation of posts & panels Bekafix Super MAKING CORNERS Corners shown in the drawing are all possible angles using one single post. For all other angles 2 posts are needed INTERIOR EXTERIOR Nylofor 2D ANGLES ANGLES EXTERIOR ANGLES...
- Page 30 2. Installation of the fencing systems Installation of posts & panels Bekafix Super MAKING CORNERS Corners shown in the drawing are all possible angles using one single post. For all other angles 2 posts are needed INTERIOR ANGLES 160°-180° INTERIOR ANGLES 90°-150° Nylofor 3D / 3D PRO INTERIOR ANGLES 155°-180°...
- Page 31 2. Installation of the fencing systems Installation of posts & panels Bekafix Super INSTALLATION ON SLOPES When building a fence on a slope using the Bekafix Super post it is best to start at the highest point of the site. 25 mm steps are possible Where the site slopes, the next panel should not be hooked into the hook cap;...
- Page 32 2. Installation of the fencing systems Installation of posts & panels Bekafix Super INSTALLATION WITH CONCRETE SLABS A concrete slab can be placed in the middle of the Bekafix Super post. The same installation principle applies: post – panel – concrete slab – post – panel –...
-
Page 33: Quixolid Plus
2. Installation of the fencing system Install posts & panels Quixolid Plus The panel is directly secured by the inner folding that blocks the vertical wire of the panel Use the tension tool to keep the panels in position while installing the fence 28/10/2019 –... - Page 34 2. Installation of the fencing system Install posts & panels Quixolid Plus MAKING CORNERS Corners between 60° and 180° can be made with one and the same post 28/10/2019 – Nylofor ® - Installation manual...
- Page 35 2. Installation of the fencing system Install posts & panels Quixolid Plus INSTALLATION ON SLOPES Slopes are possible with steps of 100mm 28/10/2019 – Nylofor ® - Installation manual...
- Page 36 2. Installation of the fencing system Install posts & panels Quixolid Plus INSTALLATION OF THE BASE PLATE Holes are already foreseen in the posts Screw M8x20 – stainless steel - 2x M8 washer - stainless steel - 4x M8 nut - stainless steel - 2x Note: bolts and washers must be ordered separately 28/10/2019 –...
- Page 37 2. Installation of the fencing system Install posts & panels Quixolid Plus INSTALLATION WITH CONCRETE PLATE – The post can be used to hold the concrete plate, no additional plate holder is required 28/10/2019 – Nylofor ® - Installation manual...
-
Page 38: Options
3. Options Square posts ALUMINIUM CONNECTOR – For extra security – For posts 60x60 to connect the vertical part of the post and the bent arm of the security fence SECURITY PROFILE – For extra security – Can be used to attach Nylofor F, 2D or 2D Super onto 60x60 posts 28/10/2019 –... - Page 39 3. Options Bekafix SLANTING SUPPORT – For extra security – To attach Concertina (single or double) or barb wire CONNECTOR – For extra security – To connect square post with slanting support – Maximum loading of this piece is 50 kg! * In case of special requirements, it’s advised to contact a project engineer for strength calculations.
- Page 40 3. Options Bekafix Super SLANTING SUPPORT – For extra security – To attach Concertina (single or double) or barb wire 28/10/2019 – Nylofor ® - Installation manual...
Need help?
Do you have a question about the Nylofor square post and is the answer not in the manual?
Questions and answers