Adapter - Delem DA-66T Reference Manual

10.4.

Adapter

On this page a tool adapter can programmed. The programmed dimensions are used for
collision warnings.
Enable adapters
Enable or disable the possibility to use an adapter.
Disabled: adapter cannot be programmed.
Enabled: in each program can be chosen whether or not to use an adapter.
Adapter height
The adapter height. Important: this height value will be used in bend depth calculation.
Adapter width
The width of the adapter.
Clamp height
The height of the clamp of the adapter.
Clamp width
The width of the clamp.
Clamp position
The position of the clamp, related to the adapter.
V0311, 10.31