Using The Base System; Installing And Starting Up The System - Hitachi CMU Series User Manual

4.2 Using the Base System

This section provides instructions on using the Base System for the CMU.

4.2.1 Installing and starting up the system

Installing
To install the Base System, you must execute the setup program that is stored in the Base
System DISK1 folder on the CD.
Double-click "setup.exe" that is stored in the DISK1 folder on the Base System CD. Since
no window opens upon completion of installation, attach a shortcut to the desktop as needed.
Click the Start
SYSTEM] – [S10V BASE SYSTEM] from the [Start] menu on the Windows® screen. Click
and hold the right mouse button on the [S10V BASE SYSTEM] and move the pointer to the
desktop. Then, choose [Copy Here] from the pop-up menu.
Before installing the Base System, shut down all Windows® programs running,
including those resident in memory, such as a virus checker. If you install the
Base System without shutting down these programs, an error might occur while
installing it. If an error is encountered, uninstall the Base System once as
instructed in " Uninstalling" to quit all Windows® programs and then reinstall the
S10V Base System.
button and choose [(All) Programs] – [Hitachi S10V] – [S10V BASE
NOTICE
4-5
4 OPERATION