4.1.2 CMU mounting rotary switches (for LQP520)
The LQP520 has three rotary switches - the T/M switch, and the ST.No. U and L switches.
These three rotary switches are described below.
T/M
0: Use the CMU normally with this switch setting.
A: Disable CMU program (HI-FLOW, task and NX) operations. For more information, see
"4.4 Disabling CMU Program Operations."
F: Let the CMU operate in test mode. (Do not set this position.)
ST.No. U/L
0, 0: The CMU operates at the IP address that has previously been set by the S10V Base
System of the tool system.
No communication can be established if the IP address is not set.
F, F: The CMU operates at IP address 192.192.192.1.
T/M
U
ST.No.
L
4-3
4 OPERATION