Download
Share
Print this page
Wen 23103 Manual
  1. Manuals
  2. Brands
  3. Wen Manuals
  4. Power Tool
  5. 23103
  6. Manual

Wen 23103 Manual

Variable speed rotary tool with case and flex shaft
Hide thumbs Also See for 23103:

Advertisement

Quick Links

3065544
For replacement parts visit
WENPRODUCTS.COM
Your new tool has been engineered and manufactured to WEN's highest standards for dependability, ease
of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If
you use your tool properly and for intended purpose, you will enjoy years of safe, reliable service.
NOTICE: Please refer to wenproducts.com for the most up-to-date instruction manual.
VARIABLE SPEED
ROTARY TOOL
WITH CASE AND FLEX SHAFT
IMPORTANT:
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us at:
800-232-1195
techsupport@wenproducts.com
WENPRODUCTS.COM
Model # 23103
bit.ly/wenvideo
(M-F 8AM-5PM CST)

Advertisement

loading
Need help?

Need help?

Do you have a question about the 23103 and is the answer not in the manual?

Questions and answers

Related Manuals for Wen 23103

Summary of Contents for Wen 23103

  • Page 1 WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe, reliable service.

  • Page 2: Table Of Contents

    9 x 2-1/4 x 1-3/4 in. Product Weight: 1.5 lbs Compatible Rotary Tool Accessories Kits: 150-Piece (Model 230151A), 282-Piece (Model 230282A), 320-Piece (Model 230321A), 327-Piece (Model 230327A). Your rotary tool is also compatible with the WEN 2305-KC Keyless Rotary Tool Chuck, available at wenproducts.com.

  • Page 3: Safety Introduction

    SAFETY INTRODUCTION Thanks for purchasing the WEN Rotary Tool. If you like doing DIY projects that involve cutting, grinding, sanding, drilling, polishing, deburring, carving and who knows what else, then this is the right tool for you. This manual pro- vides information regarding potential safety concerns, as well as helpful assembly and operating instructions.

  • Page 4: General Safety Rules

    GENERAL SAFETY RULES Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instruc- tions may result in electric shock, fire and serious injury. To avoid mistakes and serious injury, do not plug in your tool until the following steps have been read and understood.
  • Page 5 GENERAL SAFETY RULES POWER TOOL USE AND CARE 1. Avoid accidental start-ups. Make sure the power switch is in the OFF position before connecting the plug to a power source or carrying the tool. 2. Check power tool for damaged parts. Check for misalignment of moving parts, jamming, breakage, improper mounting, or any other conditions that may affect the tool’s operation.

  • Page 6: Electrical Information

    ELECTRICAL INFORMATION DOUBLE INSULATION Double insulation is a concept in safety in electric power tools, where two systems of insulation are pro- vided. This eliminates the need for the usual three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded.

  • Page 7: Rotary Tool Safety Rules

    ROTARY TOOL SAFETY RULES WARNING: Read and understand all warnings, cautions and operating instructions before using this equipment. Failure to follow all instructions listed below may result in personal injury and tool damage. 1. WORK ENVIRONMENT. Do not operate the tool in wet or damp conditions; doing so significantly increases the risk of electrical shock.

  • Page 8: Know Your Rotary Tool

    KNOW YOUR ROTARY TOOL Carefully unpack the tool from the packaging. Check all components and compare against the graph below. If any part is damaged or missing, please contact our customer service at (800) 232-1195, M-F 8-5 CST or email us at techsupport@wenproducts.com.
  • Page 9 KNOW YOUR ROTARY TOOL Refer to the chart below for explanations and recommended applications for your rotary tool accessory bits. Accessory Explanation & Applications For holding a rotary bit in place. Your tool comes with 1/8-inch and 3/32-inch col- 1. Collet lets.
  • Page 10 ASSEMBLY AND ADJUSTMENTS WARNING: To avoid injury from accidental startups, always ensure that the tool is switched OFF and unplugged from the power supply before making adjustments or changing accessories. INSTALLING ROTARY TOOL BITS 1. Switch off and unplug the tool before attempting any adjustments. 2.
  • Page 11 ASSEMBLY AND ADJUSTMENTS ATTACHING THE FLEX SHAFT (Fig. 2 - 10) FOR VIDEO INSTRUCTIONS ON ATTACHING THE FLEX SHAFT, VISIT: http://bit.ly/wenflexshaft 1. Unscrew and remove the locking collar from the end of the rotary tool (Fig. 2). 2. Take the flex shaft and slide the inner core out about 2 to 3 inches (Fig.

  • Page 12: Operation

    OPERATION WARNING: Read and thoroughly understand all instructions and safety information before operating this rotary tool. Failure to do so may cause serious injury. ADJUSTING THE SPEED OF THE ROTARY TOOL (Fig. 12) The variable speed adjustment dial on the top of the rotary tool is used to set the desired rotation speed.

  • Page 13: Maintenance

    Replace the brushes when the brush length gets down to 3/16 of an inch or when the tool stops working. Replacement carbon brushes (Model 23103-009) can be ordered at wenproducts.com. 1. Switch off and disconnect the tool from the power supply.
  • Page 14 Bearing 23103-017 Flex Shaft (Not Pictured) Compatible Rotary Tool Accessories Kits: 150-Piece (Model 230151A), 282-Piece (Model 230282A), 320-Piece (Model 230321A), 327-Piece (Model 230327A). Your rotary tool is also compatible with the WEN 2305-KC Keyless Rotary Tool Chuck. Available at wenproducts.com.
  • Page 15 LIMITED TWO YEAR WARRANTY WEN Products is committed to build tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN con- sumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
  • Page 16 THANKS FOR REMEMBERING...
Save PDF